Brother Innov-is CS 8080 Sewing Machine Manual

The Brother Innov-is CS 8080 is a versatile computerized sewing and embroidery machine featuring a large color touchscreen LCD, built-in embroidery designs and fonts, automatic needle threader, drop-in bobbin system, advanced needle plate with seam guide, adjustable sewing speed, automatic thread cutter, and a wide range of built-in stitches. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Operation 4. Specifications 5. Controls and Functions 6. Basic Sewing Operations 7. Embroidery Functions 8. Maintenance and Cleaning 9. Accessories and Attachments 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Large color touchscreen LCD, Automatic needle threader, Drop-in bobbin system, Built-in embroidery unit, USB port for design import, Knee lifter, Adjustable sewing speed control, Automatic thread cutter.

Feature	Description
Color Touchscreen LCD	7-inch screen for stitch selection and embroidery editing
Built-in Stitches	Over 200 utility, decorative, and quilting stitches
Built-in Embroidery Designs	Over 100 designs and 5 fonts included
Automatic Needle Threader	Threads needle with push of lever
Drop-in Bobbin System	Top-loading bobbin with clear cover
USB Port	Import custom embroidery designs from USB flash drive
Automatic Thread Cutter	Cuts top and bobbin threads with button press
Knee Lifter	Raises presser foot hands-free
Speed Control Slider	Adjusts maximum sewing speed
Needle Up/Down Function	Programmable needle position

Unpacking and Setup

Unpack and inspect all contents. Place on stable table or sewing cabinet.

Remove machine from box: Lift machine by base, not by handle or accessories.
Attach extension table: Slide onto free arm until it clicks into place.
Install embroidery unit: Align with connectors and slide until locked.
Connect foot control: Plug into machine port.
Plug into power outlet: Use included power cord.

WARNING! Machine is heavy; use two people for lifting. Ensure stable surface to prevent tipping.

First-Time Operation

Power on machine; follow on-screen prompts.

Thread machine: Follow threading diagram; use automatic needle threader.
Wind bobbin: Place thread on spool pin, wind using bobbin winding function.
Insert bobbin: Drop bobbin into case with thread clockwise; pull thread through slot.
Select stitch: Touch stitch icon on screen; adjust length/width if needed.
Test sew: Use scrap fabric to check tension and stitch quality.

CAUTION! Keep fingers away from needle area during operation. Turn off when threading or changing needle.

Specifications

Type: Computerized Sewing and Embroidery Machine.
Stitch Width: Up to 7mm.
Stitch Length: Up to 5mm.
Sewing Speed: Up to 850 stitches per minute.
Embroidery Area: 5" x 7" (130mm x 180mm).
Needle: HAx1 needle system (included).
Bobbin: Brother SA156 plastic bobbins.
Display: 7-inch color LCD touchscreen.
Power Requirements: 120V AC, 60Hz.
Dimensions: 21.7" W x 10.2" H x 18.9" D.
Weight: 26.5 lbs.

Controls and Functions

Access functions via touchscreen or physical buttons. Front Panel: Power switch, Start/Stop button, Needle Up/Down, Thread Cutter, Speed control slider.

Touchscreen: Stitch selection, Embroidery editing, Settings menu, Help functions.

Stitch Settings: Length, Width, Mirror, Twin needle mode. Embroidery: Design selection, Resize, Rotate, Combine designs. System: Language selection (default ENGLISH), Sound volume, Screen brightness, Machine settings reset.

Basic Sewing Operations

Straight stitch, zigzag, buttonholes, decorative stitches.

Select sewing foot: Install appropriate foot for stitch type.
Position fabric: Lower presser foot; align with seam guide.
Start sewing: Press Start/Stop button or use foot control.
Reverse stitching: Press reverse button to secure stitches.
Automatic thread cutting: Press thread cutter when finished.
Buttonholes: Use automatic one-step buttonhole function.

Tip: Always test stitch settings on scrap fabric before sewing project.

Embroidery Functions

Built-in designs, USB import, editing functions.

Attach embroidery unit: Ensure machine is off before attaching.
Hoop fabric: Use appropriate hoop size; tighten fabric evenly.
Select design: Choose from built-in designs or USB import.
Edit design: Resize, rotate, combine designs on screen.
Thread colors: Follow on-screen color sequence prompts.
Start embroidery: Press Start button; machine will stitch automatically.
Color changes: Machine stops automatically for thread changes.
Remove hoop: After completion, remove from machine and fabric from hoop.

WARNING! Keep hands away from moving embroidery unit. Do not touch screen during embroidery.

Maintenance and Cleaning

Regular maintenance ensures optimal performance.

Daily: Brush lint from bobbin area and feed dogs.
Weekly: Oil hook race and shuttle (use Brother sewing machine oil only).
Monthly: Clean under needle plate; check needle for damage.
As needed: Clean touchscreen with soft, dry cloth only.

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended oils.

Accessories and Attachments

Standard accessories included:

Embroidery unit and 5" x 7" hoop
Standard sewing feet: Zigzag, buttonhole, zipper, overcasting
Additional feet: Walking foot, quilting guide, blind hem foot
Needles: Assorted sizes
Bobbin (3), Bobbin case
Screwdrivers, Lint brush, Seam ripper
Spool caps, Spool net
Instruction manual and quick reference guide

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. CE marked for European compliance. Copyright © Brother Industries, Ltd. For support, visit www.brother-usa.com or contact Brother Customer Service at 1-877-888-6523. Serial number located on machine base.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't turn on	Power connection	Check power cord connection; ensure outlet works.
Thread breaking	Tension/thread quality	Rethread machine; check tension settings; use quality thread.
Skipped stitches	Needle issues	Replace needle; ensure correct type/size; check threading.
Bobbin thread bunching	Bobbin insertion	Reinsert bobbin with thread clockwise; check bobbin case.
Embroidery design misaligned	Hooping/tension	Rehoop fabric tightly; check stabilizer; adjust upper tension.
Touchscreen not responding	Screen lock/calibration	Restart machine; clean screen; recalibrate in settings.
Unusual noise	Lint/thread jam	Clean bobbin area; remove thread jam; check for obstructions.

Reset: Settings menu > System > Initialize to reset to factory defaults.

Service: 1-877-888-6523; www.brother-usa.com