Brother LS 2000 Sewing Machine Manual

The Brother LS 2000 is a versatile and user-friendly mechanical sewing machine designed for beginners and home sewers. It features 25 built-in stitches, a 4-step buttonhole, easy stitch selection dial, automatic bobbin winding, drop-in bobbin system, adjustable stitch length and width, free arm capability, built-in LED light, and includes essential accessories. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main body with stitch dial, Presser foot, Needle clamp, Bobbin case, Handwheel, Reverse stitch button, Stitch length/width dials, Free arm.

Unpacking and Setup

Unpack and inspect all contents. Place on stable, flat surface.

1. Remove machine from box: Lift by carrying handle, not by accessories box.
2. Attach power cord: Plug into machine rear, then into wall outlet (120V).
3. Install foot control: Connect to machine port, place on floor.
4. Wind and insert bobbin: Follow automatic winding instructions; place in bobbin case.
5. Thread machine: Follow numbered threading path on machine.

WARNING! Keep fingers away from needle area during setup and operation. Ensure machine is unplugged during threading and bobbin installation.

First-Time Operation

Plug in power, turn on power switch (if present), and test basic functions.

1. Select straight stitch: Turn stitch dial to "1" or straight stitch symbol.
2. Place fabric: Lower presser foot lever.
3. Start sewing: Gently press foot control; guide fabric with hands on sides.
4. Reverse stitching: Hold reverse lever to sew backward at start/end.
5. Finish: Raise needle to highest position, lift presser foot, remove fabric.

CAUTION! Always raise needle before removing fabric to avoid needle breakage.

Specifications

• Type: Mechanical sewing machine.
• Stitches: 25 built-in stitches.
• Buttonhole: 4-step manual buttonhole.
• Max Stitch Length: 4 mm.
• Max Stitch Width: 5 mm.
• Bobbin: Top-loading, Class 15 transparent bobbin.
• Needle: Standard domestic needle system 130/705H.
• Light: LED bulb.
• Power Supply: 120V AC, 60Hz.
• Included Accessories: All-purpose foot, buttonhole foot, zipper foot, button sewing foot, seam ripper, cleaning brush, needles, bobbins, spool caps, screwdriver.

Controls and Functions

Main Controls: Stitch selection dial, Stitch length dial, Stitch width dial, Reverse stitch lever, Handwheel, Presser foot lever, Bobbin winder spindle.

Stitch Dial: Turn to select stitch pattern (numbered 1-25). Length Dial: Adjusts stitch length (0-4). Width Dial: Adjusts zigzag width (0-5). Reverse Lever: Hold to sew backward. Handwheel: Manually raise/lower needle. Bobbin Winder: Winds bobbin when pushed to right.

Stitch Selection and Settings

Select stitch via dial; adjust length/width as needed.

1. Straight Stitch (1-4): For seams; set width to 0, length 2-3.
2. Zigzag Stitch (5-10): For finishing edges; width 3-5, length 1-2.
3. Decorative Stitches (11-20): For embellishment; refer to stitch chart.
4. Stretch Stitches (21-25): For knits; use ballpoint needle.
5. Buttonhole (marked): Use 4-step process with buttonhole foot.

Tip: Test stitch on fabric scrap before starting project.

Basic Sewing Techniques

Follow these steps for common tasks.

1. Seam: Select straight stitch, align fabric edges, sew with 5/8" seam allowance.
2. Zigzag Finish: Sew zigzag along raw edge to prevent fraying.
3. Buttonhole: Mark position, attach buttonhole foot, follow 4-step sequence.
4. Zipper: Use zipper foot; baste zipper area first.
5. Free Arm: Remove accessory tray to sew sleeves and cuffs.

WARNING! Do not pull fabric while sewing; let feed dogs move it.

Maintenance and Cleaning

Unplug machine before maintenance.

1. Clean lint: Remove needle plate screws; lift plate; brush lint from bobbin area.
2. Oil: Apply 1-2 drops of sewing machine oil to hook race as per manual (if required).
3. Needle: Replace bent or dull needles regularly.
4. Exterior: Wipe with soft, dry cloth.

CAUTION! Do not use compressed air; it can force lint deeper.

Accessories and Parts

Standard accessories included; additional feet available separately.

Safety Information

Always follow safety guidelines to prevent injury.

• Unplug machine when not in use, during threading, bobbin changes, or maintenance.
• Keep fingers away from moving needle and feed dogs.
• Do not sew over pins; remove them before they reach needle.
• Use correct needle and thread for fabric type.
• Ensure proper ventilation; avoid blocking air vents.
• Store in dry place; avoid extreme temperatures.

Troubleshooting

Reset: Unplug for 5 minutes if electronic issues occur (though mechanical).

Service: For repairs, contact authorized Brother service center: 1-877-888-5623 or visit www.brother-usa.com.