Brother LS2400 Sewing Machine Manual

The Brother LS2400 is a versatile mechanical sewing machine designed for beginners and home sewers. It features 24 built-in stitches, a 4-step buttonhole, easy stitch selection, automatic bobbin winding, adjustable stitch length and width, free arm capability, and a built-in LED light. Powered by 120V AC, it comes with essential accessories for a wide range of sewing projects. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Sewing machine head, Free arm, Stitch selection dial, Stitch length/width controls, Bobbin winder, LED light, Foot pedal, Accessory storage.

Unpacking and Setup

Unpack and inspect all contents. Place on a stable, flat surface.

1. Remove machine from packaging and place on table.
2. Attach foot pedal: Plug into machine's foot pedal jack.
3. Connect power: Plug power cord into machine, then into 120V AC outlet.
4. Install needle: Loosen needle clamp screw, insert needle with flat side facing back, tighten screw.
5. Attach presser foot: Raise presser foot lever, snap on desired foot.

WARNING! Keep fingers away from needle area during operation. Ensure machine is unplugged during needle changes and maintenance.

First-Time Operation

Power on machine; follow steps to thread and begin sewing.

1. Wind bobbin: Place thread on spool pin, guide through bobbin winder tension, place bobbin on winder shaft, push to right, press foot pedal.
2. Insert bobbin: Open bobbin cover, insert bobbin with thread unwinding counterclockwise, pull thread under tension spring.
3. Thread upper thread: Raise presser foot, follow numbered threading path on machine, thread through needle from front to back.
4. Select stitch: Turn stitch selection dial to desired pattern.
5. Begin sewing: Place fabric under presser foot, lower presser foot lever, gently press foot pedal to start.

CAUTION! Always lower presser foot before sewing. Do not pull fabric; let feed dogs move it.

Specifications

• Model: Brother LS2400.
• Type: Mechanical sewing machine.
• Stitches: 24 built-in stitches.
• Buttonhole: 4-step manual buttonhole.
• Stitch Length: Adjustable from 0 to 4 mm.
• Stitch Width: Adjustable from 0 to 5 mm.
• Max Sewing Speed: Up to 800 stitches per minute.
• Needle: Household sewing machine needle (size 11/75 or 14/90).
• Bobbin: Class 15 transparent bobbin.
• Lighting: Built-in LED light.
• Power Source: 120V AC, 60Hz.
• Dimensions: Standard portable sewing machine size.
• Weight: Lightweight for easy portability.

Controls and Functions

Main controls located on front and side of machine.

Front Panel: Stitch selection dial, Stitch length dial, Stitch width dial, Reverse sewing lever, Presser foot lever, Bobbin winder, Spool pins.

Side/Under Bed: Handwheel (forward/backward), Bobbin cover release, Free arm release lever, Foot pedal jack, Power switch.

Basic Functions: Stitch selection (turn dial), Stitch adjustment (length/width dials), Reverse sewing (hold lever), Bobbin winding (push winder shaft), Free arm conversion (remove accessory tray).

Stitch Selection and Settings

Select from 24 stitches for various fabrics and projects.

1. Utility Stitches (1-6): Straight stitch, zigzag, stretch stitches for seams and finishing.
2. Decorative Stitches (7-18): Shell, scallop, honeycomb for embellishments.
3. Stretch Stitches (19-24): For knit fabrics and elastic.
4. Buttonhole (marked): Use 4-step process with buttonhole foot.
5. Adjust settings: Set stitch length for fabric weight (shorter for delicate, longer for basting). Set stitch width for zigzag and decorative patterns.

Tip: Test stitch settings on a fabric scrap before starting your project.

Threading and Bobbin Winding

Proper threading is essential for smooth operation.

1. Upper Threading: Follow numbered path: spool pin > thread guide > tension discs > take-up lever > thread guide > needle.
2. Bobbin Winding: Place spool on pin, thread through guide, wrap around bobbin winder tension, place bobbin on shaft, push shaft right, press foot pedal.
3. Bobbin Insertion: Open cover, insert bobbin so thread unwinds counterclockwise, pull thread under tension spring, close cover.
4. Drawing Up Bobbin Thread: Hold upper thread, turn handwheel toward you until needle goes down and up, pull upper thread to bring bobbin thread up through needle plate.

WARNING! Ensure presser foot is raised when threading upper thread to engage tension discs.

Maintenance and Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Unplug machine before any maintenance.
2. Cleaning: Remove needle plate screws, lift plate, use brush to remove lint from feed dogs and bobbin area.
3. Oiling: Apply one drop of sewing machine oil to hook race and moving parts as indicated in diagram (if required; some newer models are self-lubricating).
4. Needle Replacement: Replace needle regularly, especially after dulling or hitting pins.
5. Storage: Cover machine when not in use to prevent dust accumulation.

CAUTION! Use only sewing machine oil. Do not use household oils. Never spray cleaners directly onto machine.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Copyright © Brother Industries, Ltd. All rights reserved. Brother is a registered trademark of Brother Industries, Ltd. For support, visit www.brother-usa.com or contact Brother Customer Service at 1-800-284-4357.

Troubleshooting

Reset: Unplug machine for 5 minutes to reset electronic components (if applicable).

Service: For repairs not covered in manual, contact authorized Brother service center at 1-800-284-4357.