Brother Model CE1100PRW Manual

The Brother CE1100PRW is a computerized sewing and embroidery machine featuring 110 built-in stitches, 70 built-in embroidery designs, a large 4.3" LCD touchscreen, automatic needle threader, drop-in bobbin system, built-in monogramming fonts, USB port for importing designs, and a wide range of sewing feet. Powered by 120V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Functions 6. Stitch Selection & Settings 7. Embroidery Operation 8. Maintenance & Cleaning 9. Accessories 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: LCD Touchscreen, Automatic Needle Threader, Drop-in Bobbin, USB Port, Built-in Stitches & Designs, Free Arm, LED Work Light.

Feature	Description
LCD Touchscreen	4.3" color display for stitch/design selection and settings
Automatic Needle Threader	Threads needle with push of lever
Drop-in Bobbin System	Top-loading, jam-resistant bobbin
USB Port	For importing custom embroidery designs
Built-in Stitches	110 utility, decorative, and quilting stitches
Built-in Embroidery Designs	70 designs including florals, motifs, and alphabets
Free Arm	For sewing sleeves and cuffs
LED Work Light	Bright illumination of sewing area
Speed Control Slider	Adjusts sewing speed
Start/Stop Button	Sews without foot control

Installation & Setup

Unpack and inspect contents. Place on stable table.

Remove packing materials: Take off all tape and foam protectors.
Attach extension table: Slide onto free arm until it clicks.
Install foot control: Plug into machine port.
Connect power: Plug power cord into machine, then into wall outlet.
Wind and insert bobbin: Follow on-screen instructions.
Thread machine: Use automatic needle threader.

WARNING! Keep fingers away from needle area during operation. Ensure machine is on a flat, stable surface.

First-Time Use

Power on machine; follow on-screen prompts.

Select language: Touch screen to choose ENGLISH (default).
Thread machine: Use automatic needle threader or manual guide.
Insert bobbin: Place wound bobbin in case, thread through slot.
Test sew: Use scrap fabric to test basic stitch.
Explore stitches: Browse built-in stitches via touchscreen.

CAUTION! Always turn off power before changing needle or performing maintenance.

Specifications

Type: Computerized Sewing and Embroidery Machine.
Built-in Stitches: 110 (utility, decorative, quilting).
Built-in Embroidery Designs: 70 designs, 5 fonts.
Display: 4.3" LCD color touchscreen.
Max Embroidery Area: 5.7" x 7.0".
Bobbin: Drop-in, top-loading.
Needle Threader: Automatic.
Connectivity: USB port.
Power Source: 120V AC, 60Hz.
Dimensions: 18.1" W x 11.8" H x 7.9" D.
Weight: 17.6 lbs.

Controls and Functions

Access functions via touchscreen or physical buttons. Front Panel: POWER, START/STOP, NEEDLE UP/DOWN, REVERSE, SPEED CONTROL SLIDER.

Touchscreen: Stitch/design selection, editing, settings, help. Physical Controls: Handwheel, Bobbin Winder, Presser Foot Lifter, Thread Cutter.

Stitch Settings: Length, Width, Mirroring, Elongation. Embroidery: Design selection, resizing, rotating, combining. Utility: Thread tension adjustment, needle position, automatic thread cutter.

Stitch Selection & Settings

Select from 110 built-in stitches.

Press STITCH CATEGORY on touchscreen (Utility, Decorative, Quilting).
Touch desired stitch icon.
Adjust settings: Length, Width, Mirror via touchscreen.
Attach appropriate presser foot.
Begin sewing with foot control or START/STOP button.

Tip: Always test stitch on scrap fabric first. Refer to stitch chart for recommended fabric and foot.

Embroidery Operation

Supports built-in designs and USB imports.

Attach embroidery foot and hoop fabric.
Press EMBROIDERY button on touchscreen.
Select design from built-in library or USB.
Edit design: Resize, rotate, combine if desired.
Load hoop onto machine.
Press START to begin embroidery.
Machine stops automatically for color changes.
Remove hoop when finished.

WARNING! Keep hands away from moving hoop during embroidery. Ensure fabric is hooped tightly.

Maintenance & Cleaning

Unplug machine before cleaning.

Clean lint: Remove needle plate and bobbin case; use brush to remove lint.
Oil machine: Apply sewing machine oil to designated points as per manual.
Clean exterior: Use soft, dry cloth only.
Needle replacement: Replace bent or dull needles immediately.

CAUTION! Do not use compressed air; it can force lint deeper. Never spray cleaners directly on machine.

Accessories

Included accessories: Standard Foot, Zipper Foot, Buttonhole Foot, Embroidery Foot, Hoops (large and small), Bobbins, Needles, Screwdriver, Brush, Seam Ripper, Spool Caps, Power Cord, Foot Control.

Optional: Additional presser feet, embroidery design cards, carrying case.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Brother Industries, Ltd. For support, visit www.brother-usa.com or contact Brother Customer Service at 1-800-284-4357.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Power connection	Ensure power cord is plugged in securely; outlet is working.
Needle breaks	Incorrect needle/thread/fabric	Use correct needle type and size for fabric; rethread properly.
Poor stitch quality	Thread tension, needle, threading	Rethread top and bobbin; adjust tension; replace needle.
Bobbin thread bunching	Bobbin inserted incorrectly	Remove and reinsert bobbin ensuring thread runs correctly.
Embroidery design misaligned	Fabric not hooped tightly	Rehoop fabric with proper tension; stabilize appropriately.
Touchscreen unresponsive	Screen lock, calibration	Turn machine off and on; clean screen with dry cloth.

Reset: Turn power off, wait 10 seconds, then restart.

Service: 1-800-284-4357; www.brother-usa.com