brother project runway ce1100prw manual

The Brother Project Runway CE1100PRW is a computerized sewing machine designed for fashion enthusiasts and home sewers. It features 110 built-in stitches, automatic needle threading, a drop-in bobbin system, adjustable sewing speed, built-in buttonholes, a free arm, and a backlit LCD screen. Powered by standard household current. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Sewing machine head, Foot controller, Power cord, Accessory box, Instruction manual, Quick start guide.

Unpacking and Setup

Unpack and inspect all contents. Place on stable, flat surface.

1. Remove machine from box: Lift by carrying handle, not by free arm.
2. Attach power cord: Plug into machine and wall outlet.
3. Install foot controller: Connect to machine port.
4. Wind and insert bobbin: Follow bobbin winding diagram.
5. Thread machine: Use automatic needle threader or manual threading path.

WARNING! Keep fingers away from needle area during operation. Unplug machine when not in use or during maintenance.

First-Time Operation

Plug in machine and turn on power switch.

1. Select stitch: Use stitch selection dial or LCD buttons.
2. Adjust stitch length/width: Use corresponding dials.
3. Place fabric: Lower presser foot lever.
4. Start sewing: Press foot controller gently.
5. Reverse stitching: Press reverse button to secure seams.
6. Finish: Raise needle, lift presser foot, remove fabric.

CAUTION! Always use correct needle and thread for fabric type. Test stitch on scrap fabric first.

Specifications

• Model: Brother Project Runway CE1100PRW
• Stitches: 110 built-in stitches
• Buttonholes: 10 one-step automatic styles
• Needle Positions: Adjustable left/right
• Max Sewing Speed: 850 stitches per minute
• Bobbin: Class 15 transparent (included)
• Lighting: LED work area light
• Display: Backlit LCD screen
• Power Requirements: 120V AC, 60Hz
• Dimensions: 16.3" x 7.2" x 12.2"
• Weight: 13.2 lbs

Controls and Functions

Access functions via control panel. Front Panel: Power switch, Stitch selection dial, Stitch length dial, Stitch width dial, Reverse button, Needle up/down button.

LCD Panel: Shows selected stitch number, recommended presser foot, stitch length/width settings. Buttons: Stitch category, Direct stitch selection, Mirror image, Lock stitch, Memory functions.

Stitch Settings: Length (0-5mm), Width (0-7mm). Utility: Straight, zigzag, stretch, overcast. Decorative: Scallop, feather, cross, smocking. Heirloom: Quilting, appliqué, monogram.

Stitch Selection and Settings

Select from 110 stitches including utility, decorative, quilting, and heirloom.

1. Turn stitch selection dial to desired category.
2. Use arrow buttons on LCD to select specific stitch.
3. Adjust stitch length and width as needed.
4. For buttonholes: Select buttonhole style, place fabric under foot, follow automatic sequence.
5. For decorative stitches: Use stabilizer for best results.

Tip: Refer to stitch chart in manual for recommended fabrics and applications.

Maintenance and Cleaning

Unplug machine before cleaning. Regular maintenance ensures optimal performance.

1. Clean lint: Remove needle plate and bobbin case; brush away lint.
2. Oil machine: Apply sewing machine oil to designated points (see diagram).
3. Change needle: Replace after 8-10 hours of sewing or if damaged.
4. Clean exterior: Use soft, dry cloth only.

CAUTION! Do not use compressed air to clean machine. Never immerse in water.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Brother Industries, Ltd. For support, visit www.brother-usa.com or contact 1-877-467-4289. This product conforms to UL standards and CSA certifications.

Troubleshooting

Reset: Turn machine off and on to reset computerized functions.

Service: 1-877-467-4289; www.brother-usa.com