Brother Project Runway CE7070PRW Manual

The Brother Project Runway CE7070PRW is a versatile computerized sewing and embroidery machine designed for home crafters and enthusiasts. It features a wide range of built-in stitches and embroidery designs, automatic needle threading, a large LCD touchscreen, USB port for importing custom designs, and a sturdy metal frame. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Operation 4. Specifications 5. Controls and Functions 6. Stitch Selection and Sewing 7. Embroidery Functions 8. Maintenance and Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main sewing unit, LCD touchscreen, Bobbin case, Foot controller, Power cord, Accessory box with presser feet, needles, and bobbins.

Feature	Description
Built-in Stitches	Over 100 utility, decorative, and heirloom stitches
Built-in Embroidery Designs	70+ designs with multiple color options
LCD Touchscreen	3.2-inch color screen for easy stitch and design selection
Automatic Needle Threader	One-push threading for upper needle
USB Port	For importing custom embroidery designs (PES format)
Drop-in Bobbin System	Top-loading, jam-resistant bobbin with clear cover
Speed Control Slider	Adjusts maximum sewing speed
Needle Up/Down Button	Sets needle position at start/stop
Start/Stop Button	Sews without foot controller
Automatic Thread Cutter	One-touch thread cutting

Unpacking and Setup

Unpack all components carefully. Place on a sturdy, flat surface.

Remove machine from box: Lift by the carrying handle, not by the free arm.
Install foot controller: Plug into front jack.
Connect power: Plug power cord into machine, then into a 120V AC outlet.
Install bobbin: Wind bobbin using built-in winder, then insert into bobbin case.
Thread upper needle: Use automatic needle threader following on-screen guide.

WARNING! Machine is heavy; use care when lifting. Ensure workspace is clean and well-lit.

First-Time Operation

Power on machine; LCD screen will illuminate.

Select language: Touch LANGUAGE on screen, select ENGLISH (default).
Test stitches: Load scrap fabric, select a basic straight stitch, and sew slowly.
Adjust tension: For balanced stitches, refer to tension guide in manual.
Explore menus: Navigate through stitch categories and embroidery designs.

CAUTION! Keep fingers away from moving needle. Always lower presser foot before sewing.

Specifications

Type: Computerized Sewing and Embroidery Machine.
Stitch Width: Up to 7mm.
Stitch Length: Up to 5mm.
Embroidery Area: 4" x 4" (100mm x 100mm).
Speed: Up to 850 stitches per minute.
Needle: HA-1 sewing system, size 75/11 to 100/16.
Bobbin: Class 15 transparent bobbin.
Display: 3.2" color LCD touchscreen.
Power Requirements: 120V AC, 60Hz.
Dimensions: 18.1" W x 11.8" H x 7.9" D.

Controls and Functions

Access functions via touchscreen or physical buttons. Front Panel: POWER, START/STOP, NEEDLE UP/DOWN, THREAD CUTTER.

Touchscreen Menus: STITCH SELECTION, EMBROIDERY DESIGNS, SETTINGS (tension, speed), UTILITY (thread cutter, needle position).

Stitch Settings: Adjust length, width, mirror image, twin needle mode. Embroidery: Select design, resize, rotate, combine designs, thread color sequencing. System: Language, sound volume, screen brightness, machine reset.

Stitch Selection and Sewing

Supports utility, decorative, and buttonhole stitches.

Select stitch: Touch stitch category, then specific stitch.
Adjust settings: Modify length/width as needed.
Position fabric: Lower presser foot lever.
Start sewing: Press START/STOP button or use foot controller.
Automatic buttonholes: Select buttonhole style; machine sews complete buttonhole in one step.
Reverse stitching: Press REVERSE button to reinforce seams.

Tip: Always test stitch settings on a scrap of project fabric first.

Embroidery Functions

Use built-in designs or import custom designs via USB.

Hoop fabric: Use embroidery hoop included; ensure fabric is taut.
Select design: Browse built-in designs on screen or import via USB.
Edit design: Resize, rotate, or combine with other designs.
Thread colors: Follow on-screen color sequence prompts.
Start embroidery: Press START; machine will stitch design automatically.
Color changes: Machine will stop for thread color changes; follow prompts.

WARNING! Never move hoop during embroidery. Keep hands clear of moving parts.

Maintenance and Cleaning

Unplug machine before cleaning. Remove lint and dust regularly.

Clean bobbin area: Remove bobbin case and use brush to remove lint.
Oil machine: Apply sewing machine oil to designated points as per manual (every few months).
Clean exterior: Use soft, dry cloth only.
Needle replacement: Replace bent or dull needles immediately.

CAUTION! Do not use compressed air; it can force lint deeper. Use only recommended oil.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2023 Brother Industries, Ltd.; Brother is a registered trademark. For support, visit www.brother-usa.com or contact Brother Customer Service at 1-877-888-6523.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not turn on	Power connection	Check power cord is plugged in securely at both ends; ensure outlet is working.
Thread bunching underneath	Incorrect threading/bobbin	Re-thread upper thread and bobbin; ensure bobbin is inserted correctly.
Needle breaks	Wrong needle/bent needle	Replace with correct type/size; ensure needle is inserted fully and straight.
Uneven stitches	Tension settings	Adjust thread tension; re-thread; check needle size for fabric.
Embroidery design misaligned	Hoop not tight/fabric shift	Re-hoop fabric ensuring it is drum-tight; stabilize fabric properly.
USB design not recognized	File format/compatibility	Ensure design is in PES format; try a different USB stick.

Reset: Turn machine off and on. For persistent issues, perform factory reset via settings menu.

Service: 1-877-888-6523; www.brother-usa.com