brother project runway ce8080prw manual

The Brother Project Runway CE8080PRW is a computerized sewing and embroidery machine designed for fashion enthusiasts and home sewers. It features a large embroidery area, built-in embroidery designs and fonts, automatic needle threader, drop-in bobbin system, LCD touch screen, USB port for importing designs, and a wide range of built-in stitches. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Operation 4. Specifications 5. Controls and Functions 6. Basic Sewing 7. Embroidery Functions 8. Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main sewing unit, LCD touch screen, Embroidery unit, Foot controller, Accessory box, Power cord.

Feature	Description
Large embroidery area	Up to 5" x 7" embroidery field
Built-in embroidery designs	Over 100 designs and 5 fonts included
Automatic needle threader	Threads needle with ease at push of lever
Drop-in bobbin system	Top-loading, jam-resistant bobbin
LCD touch screen	Full-color display for easy stitch and design selection
USB port	Import custom embroidery designs from USB stick
Built-in stitches	Over 200 utility, decorative, and heirloom stitches
Speed control slider	Adjust sewing speed to your comfort level
Automatic thread cutter	Cuts top and bobbin thread with button press
Knee lifter	Raises presser foot with knee for fabric maneuvering

Unpacking and Setup

Unpack all contents carefully. Place machine on stable, flat surface.

Remove all packaging materials and tape from machine.
Attach embroidery unit: Align and slide into position until it clicks.
Connect foot controller to machine port.
Plug power cord into machine and then into AC outlet.
Install needle and thread according to threading diagram.

WARNING! Machine is heavy; lift with care. Ensure work area is well-lit and free of obstacles.

First-Time Operation

Power on machine; LCD screen will illuminate.

Thread machine: Follow on-screen threading guide or printed diagram.
Wind bobbin: Use built-in bobbin winder with thread from spool.
Insert bobbin: Drop bobbin into case with thread pulling counterclockwise.
Select stitch: Use touch screen to browse and select desired stitch.
Test sew: On scrap fabric, test stitch settings and tension.

CAUTION! Keep fingers away from moving needle. Turn power off when threading or changing needle.

Specifications

Type: Computerized Sewing and Embroidery Machine.
Embroidery Area: 5" x 7" (130mm x 180mm).
Built-in Designs: 100+ embroidery designs, 5 fonts.
Built-in Stitches: 200+ stitches including utility, decorative, quilting.
Needle: Home sewing machine needle size 75/11 – 100/16.
Bobbin: Brother SA156, plastic.
Display: Full-color LCD touch screen.
Connectivity: USB port for design import.
Power Source: 120V AC, 60Hz.
Dimensions: Varies with embroidery unit attached.

Controls and Functions

Access functions via LCD touch screen or physical buttons. Front Panel: Power switch, Start/Stop button, Needle Up/Down, Automatic thread cutter.

Touch Screen: Stitch selection, Design editing, Settings, Help menu, Language selection.

Sewing Settings: Stitch length, Stitch width, Thread tension, Mirror image, Twin needle mode. Embroidery Settings: Design rotation, Resizing, Lettering, Thread color selection, Hoop selection. Utility: Needle position, Presser foot pressure, Speed control, Bobbin warning, Reset to defaults.

Basic Sewing

For straight stitch, zigzag, buttonholes, and decorative stitches.

Select stitch on touch screen.
Attach appropriate presser foot.
Position fabric under presser foot, lower presser foot lever.
Press Start/Stop button or use foot controller to begin sewing.
Guide fabric gently; machine will sew at set speed.
Press Automatic thread cutter when finished, or raise needle and remove fabric.

Tip: Always test stitch on scrap fabric of same type before starting project.

Embroidery Functions

For built-in or imported embroidery designs.

Attach embroidery hoop with stabilized fabric.
Select embroidery mode on touch screen.
Choose design from library or USB.
Edit design if needed (resize, rotate, combine).
Load correct thread colors for each step.
Press Start to begin embroidery; machine will stop for color changes.
Remove hoop when design is complete.

WARNING! Do not move hoop during embroidery. Ensure fabric is well-stabilized to prevent puckering.

Maintenance

Regular cleaning ensures optimal performance.

Turn off and unplug machine before maintenance.
Clean lint from bobbin area and feed dogs with brush provided.
Oil machine as indicated in manual (specific points only).
Replace needle regularly (after 8-10 hours of sewing).
Cover machine when not in use to prevent dust accumulation.

CAUTION! Use only Brother-recommended needles, bobbins, and oil. Do not use compressed air to clean.

Regulatory Information

FCC Part 15: Class B digital device; complies with limits for residential use. Copyright © Brother Industries, Ltd. For support, visit www.brother-usa.com or contact Brother Customer Service at 1-800-284-4357. This product may be covered by one or more patents, see www.brother.com/patent.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not turn on	Power connection	Check power cord is plugged in securely at both ends.
Thread breaks frequently	Needle/thread/tension	Replace needle; ensure correct thread type; rethread top and bobbin.
Uneven stitches or puckering	Tension/threading/fabric	Adjust thread tension; rethread completely; use stabilizer for lightweight fabrics.
Embroidery design misaligned	Hooping/stabilizer	Re-hoop fabric tightly; use appropriate stabilizer; check design placement.
Error message on screen	Various	Refer to error code in manual; turn machine off and on; ensure embroidery unit is attached correctly.

Reset: Turn power off and on. For persistent errors, consult manual for factory reset procedure.

Service: 1-800-284-4357; www.brother-usa.com