Brother Project Runway CS5055PRW Manual

The Brother Project Runway CS5055PRW is a versatile 50-stitch computerized sewing machine designed for home sewing and crafting. It features an automatic needle threader, drop-in bobbin system, built-in stitches including utility, decorative, and heirloom stitches, adjustable stitch length and width, easy stitch selection dial, one-step buttonhole, free arm capability, and variable speed control. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Sewing machine head, Free arm, Stitch selection dial, LCD display, Automatic needle threader, Drop-in bobbin system, Presser foot lever, Handwheel, Foot pedal.

Unpacking and Setup

Remove all packaging materials. Place on stable, flat surface.

1. Install foot pedal: Connect to port on right side of machine.
2. Install power cord: Plug into machine and wall outlet (120V AC).
3. Attach accessory tray: Slide onto free arm area.
4. Wind bobbin: Place thread spool on pin, follow threading guide to wind bobbin.
5. Insert bobbin: Drop bobbin into case with thread clockwise; pull thread through slot.
6. Thread upper thread: Follow numbered path on machine; use automatic needle threader.

WARNING! Keep fingers away from needle area during operation. Unplug when not in use.

First-Time Operation

Plug in power cord; turn power switch to "I".

1. Select stitch: Turn dial to desired stitch number; LCD will display.
2. Attach presser foot: Lower presser foot lever to snap foot into place.
3. Test sew: Place fabric under foot; lower presser foot; gently press foot pedal.
4. Adjust tension: Use tension dial if stitches are too loose or tight.
5. Practice basic stitches: Straight stitch (01), zigzag (02).

CAUTION! Always use correct needle for fabric type. Replace bent or dull needles immediately.

Specifications

• Type: Computerized sewing machine.
• Stitches: 50 built-in stitches.
• Buttonholes: One-step automatic.
• Speed: Up to 800 stitches per minute.
• Needle Positions: Adjustable left/center/right.
• Presser Feet: Includes zigzag foot, buttonhole foot, zipper foot, blind hem foot, button sewing foot.
• Bobbin: Class 15 transparent bobbin.
• Lighting: Built-in LED light above needle area.
• Power Source: 120V AC, 60Hz.
• Dimensions: 15.7" x 7.1" x 12.2".
• Weight: 13.2 lbs.

Controls and Functions

Front Panel: Power switch, Stitch selection dial, LCD display, Stitch length dial, Stitch width dial, Reverse stitch button, Needle up/down button.

Additional Controls: Handwheel (manual needle control), Presser foot lever, Thread tension dial, Drop-in bobbin cover, Automatic needle threader lever.

Stitch Settings: Length (0-5 mm), Width (0-7 mm). Utility Stitches: Straight, zigzag, stretch, blind hem. Decorative Stitches: Scallop, feather, cross-stitch patterns. Memory: Last stitch selected retained when powered off.

Stitch Selection and Settings

Select stitch via dial; adjust length/width as needed.

1. Turn stitch selection dial to desired number (01-50).
2. Check LCD for stitch number and recommended foot.
3. Adjust stitch length: Turn dial for longer/shorter stitches.
4. Adjust stitch width: Turn dial for wider/narrower stitches (for zigzag and decorative).
5. For buttonhole: Select buttonhole stitch; attach buttonhole foot; place fabric under foot.

Tip: Test stitch settings on scrap fabric before sewing project.

Basic Sewing Techniques

Follow these steps for common sewing tasks.

1. Straight stitch: Use for seams, topstitching; set length 2.5 mm.
2. Zigzag stitch: Use for finishing edges, stretch fabrics; adjust width as needed.
3. Buttonhole: Attach buttonhole foot; machine sews automatically around button placed in foot.
4. Zipper insertion: Use zipper foot; adjust needle position to sew close to zipper teeth.
5. Blind hem: Use blind hem foot; fold fabric as instructed in manual.
6. Decorative stitching: Use stabilizer under lightweight fabrics for best results.
7. Reverse stitching: Press reverse button at start and end of seam to lock stitches.

WARNING! Do not pull fabric while sewing; let feed dogs move fabric.

Maintenance and Cleaning

Unplug machine before cleaning. Remove lint and dust regularly.

1. Clean bobbin area: Remove bobbin case; use brush to remove lint.
2. Oil machine: Apply sewing machine oil to hook race and other points as indicated in manual (sparingly).
3. Clean exterior: Wipe with soft, dry cloth.
4. Needle replacement: Turn handwheel to raise needle; loosen screw; insert new needle flat side back.
5. Light bulb replacement: Remove screw on light cover; replace with specified bulb.

CAUTION! Do not use compressed air; it can force lint into mechanism.

Accessories and Parts

Included accessories: Zigzag foot (on machine), Buttonhole foot, Zipper foot, Blind hem foot, Button sewing foot, Seam ripper/lint brush, Screwdriver, Spool caps, Bobbins (3), Needles (3), Power cord, Foot pedal, Instruction manual, Quick reference guide.

Optional Accessories: Walking foot, Quilting foot, Extension table, Carrying case.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Brother Industries, Ltd. For support, visit www.brother-usa.com or contact Brother Customer Service at 1-800-284-4357. This product conforms to applicable UL and CSA standards.

Troubleshooting

Reset: Turn power off and on to reset computerized functions.

Service: 1-800-284-4357; www.brother-usa.com