brother ps 1000 sewing machine manual

The Brother PS-1000 is a versatile electronic sewing machine designed for home use, featuring 60 built-in stitches, a one-step automatic buttonhole, automatic needle threader, drop-in bobbin system, adjustable stitch length and width, free arm capability, and multiple presser feet. It operates on 120V AC and includes a foot controller, instructional DVD, and accessories. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Electronic sewing machine with LCD display, bobbin winding system, automatic needle threader, stitch selection dial, and free arm.

Unpacking and Setup

Remove all packaging materials and inspect contents.

1. Place machine on stable, flat surface near power outlet.
2. Attach foot controller to machine port and plug into power.
3. Install needle: Loosen screw, insert needle with flat side to back, tighten.
4. Wind bobbin: Place thread on spool pin, guide through tension, wind on bobbin.
5. Insert bobbin: Drop into bobbin case with thread clockwise, pull through slot.
6. Thread upper thread: Follow numbered path, use automatic needle threader.

WARNING! Keep fingers away from needle area during setup and operation. Ensure power is off during installation.

First-Time Operation

Power on machine; select basic straight stitch for initial test.

1. Turn power switch to ON; LCD will illuminate.
2. Select stitch: Turn stitch selection dial to "01" for straight stitch.
3. Adjust stitch length: Set to medium (2.5) for general sewing.
4. Place fabric under presser foot, lower foot lever.
5. Gently press foot controller to start sewing; guide fabric evenly.
6. Practice on scrap fabric to adjust speed and tension.

CAUTION! Always turn off power when changing needle, bobbin, or presser foot.

Specifications

• Model: Brother PS-1000 Electronic Sewing Machine.
• Stitches: 60 built-in stitches (utility, decorative, stretch).
• Buttonhole: One-step automatic.
• Needle Threader: Automatic.
• Bobbin System: Drop-in, class 15 transparent bobbin.
• Stitch Length: Adjustable up to 5mm.
• Stitch Width: Adjustable up to 7mm.
• Presser Feet: 6 included (zigzag, buttonhole, zipper, etc.).
• Free Arm: Yes, removable flatbed.
• Power Supply: 120V AC, 60Hz.
• Dimensions: Compact design for home use.

Controls and Settings

Main controls: Power switch, stitch selection dial, stitch length dial, stitch width dial, reverse stitch button.

LCD Display: Shows selected stitch number, recommended presser foot, and stitch settings.

Stitch Selection: Turn dial to choose from 60 stitches (numbers 01-60). Stitch Length: Adjust from 0-5mm (0 for bobbin winding). Stitch Width: Adjust from 0-7mm for zigzag and decorative stitches. Reverse Stitch: Hold button to sew backwards for reinforcement. Tension Control: Dial for upper thread tension (4 for normal fabrics).

Basic Sewing Techniques

Follow these steps for common sewing tasks.

1. Straight Stitch: Select stitch 01, adjust length, sew forward with reverse at ends.
2. Zigzag Stitch: Select stitch 02-06, adjust width for finishing edges or appliqué.
3. Buttonhole: Select buttonhole stitch, place button in foot, machine sews automatically.
4. Zipper Insertion: Use zipper foot; baste zipper area, stitch close to teeth.
5. Free Arm Sewing: Remove accessory tray for sleeves, cuffs, and pant legs.

Tip: Always test stitch on scrap fabric of same material before sewing project.

Stitch Selection and Functions

Stitch chart included in manual; groups include:

1. Utility Stitches (01-15): Straight, zigzag, stretch, blind hem.
2. Decorative Stitches (16-45): Scallops, waves, leaves, flowers.
3. Heirloom Stitches (46-60): Quilting, satin, cross-stitch patterns.
4. Buttonhole: Single stitch for all sizes; automatic sensing.
5. Memory Function: None; select stitch each time.
6. Mirror Imaging: Not available on PS-1000.

WARNING! Do not force handwheel or dials; turn power off if jammed.

Maintenance and Cleaning

Regular maintenance ensures optimal performance.

1. Unplug machine before cleaning.
2. Remove needle plate screws; clean lint from bobbin area with brush.
3. Oil sparingly per manual instructions (use sewing machine oil only).
4. Wipe exterior with soft, dry cloth; avoid chemicals.
5. Replace needle after 8-10 hours of sewing or if bent/dull.

CAUTION! Never use compressed air; it can force lint into mechanism.

Accessories and Parts

Included accessories: Foot controller, power cord, 6 presser feet, bobbins (class 15), needles, screwdriver, brush, seam ripper, instructional DVD.

Optional: Additional presser feet available for quilting, embroidery, etc.

Replacement Parts: Use genuine Brother needles (HAx1) and bobbins (SA156) for best results.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Brother Industries, Ltd. For support, visit www.brother-usa.com or contact 1-877-467-4289. Warranty: Limited 25-year warranty; see warranty card for details.

Troubleshooting

Reset: Turn power off and on to reset electronic settings.

Service: 1-877-467-4289; www.brother-usa.com for authorized service centers.