brother sc9500 sewing machine manual

The Brother SC9500 is a versatile computerized sewing machine featuring a wide range of built-in stitches, automatic needle threading, LCD display, drop-in bobbin system, adjustable sewing speed, and multiple presser feet for various sewing techniques. It is designed for both beginners and experienced sewers, offering ease of use and professional results. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Computerized control panel with LCD, automatic needle threader, drop-in bobbin, adjustable presser foot pressure, built-in stitches, and accessory storage.

Unpacking and Setup

Remove machine and accessories from packaging. Place on stable, flat surface.

1. Remove all packing materials and tape from machine.
2. Attach power cord: Plug into machine and wall outlet (120V AC).
3. Install foot pedal: Connect to machine port and place on floor.
4. Attach accessory tray: Slide onto free arm if detachable.
5. Insert needle: Ensure flat side faces back, tighten screw.
6. Wind and insert bobbin: Follow threading diagram.

WARNING! Machine is heavy; lift with care. Ensure work area is well-lit and free of obstructions.

First-Time Operation

Power on machine; LCD will illuminate. Follow steps to begin sewing.

1. Thread upper thread: Use automatic needle threader or follow path marked on machine.
2. Insert bobbin: Place bobbin in case, pull thread through slot.
3. Select stitch: Use stitch selection dial or buttons to choose desired stitch.
4. Adjust settings: Set stitch length and width using +/- buttons.
5. Test sew: Use scrap fabric to check tension and stitch formation.

CAUTION! Keep fingers away from needle during operation. Always turn off power when threading or changing accessories.

Specifications

• Model: Brother SC9500 Computerized Sewing Machine.
• Stitches: 100+ built-in stitches including utility, decorative, heirloom, and quilting.
• Buttonholes: 8 one-step automatic buttonhole styles.
• Max Sewing Speed: 850 stitches per minute.
• Needle Positions: Adjustable left/right needle position.
• Presser Feet: Includes zigzag, buttonhole, zipper, blind hem, overcasting, and quilting foot.
• Display: Backlit LCD screen.
• Power Supply: 120V AC, 60Hz.
• Dimensions: Compact design with included hard cover.
• Warranty: 25-year limited warranty.

Controls and Functions

Access functions via control panel buttons and dial. Front Panel: POWER, START/STOP, REVERSE, NEEDLE UP/DOWN, SPEED SLIDER.

LCD Display: Shows stitch number, length, width, and recommended presser foot.

Stitch Selection: Turn dial or use arrow keys. Stitch Adjustment: LENGTH and WIDTH buttons. Utility Buttons: AUTO THREAD CUTTER, TENSION DIAL, THREADING LEVER. Special Functions: BUTTONHOLDER, MEMORY (stitch combination), MIRROR IMAGE.

Stitch Selection and Settings

Select from utility, decorative, or quilting stitches. Adjust for fabric type and project.

1. Turn stitch selection dial to desired category (numbers 1-100).
2. Use LENGTH button (0-5 mm) and WIDTH button (0-7 mm) to adjust.
3. For buttonholes: Select buttonhole stitch, place fabric under foot, press start.
4. For twin needle: Use zigzag stitches only; ensure width does not exceed needle capacity.
5. For embroidery: Use decorative stitches with stabilizer.

Tip: Refer to stitch chart in manual for recommended settings and presser feet.

Threading and Bobbin Winding

Upper threading and bobbin winding must be done correctly for proper stitch formation.

1. Wind bobbin: Place thread on spool pin, guide through bobbin winding tension, press bobbin winder shaft.
2. Insert bobbin: Drop bobbin into case with thread unwinding clockwise; pull thread through slot.
3. Thread upper thread: Follow numbered path on machine; use automatic needle threader by lowering lever.
4. Draw up bobbin thread: Hold upper thread, turn handwheel toward you to bring bobbin thread up.

WARNING! Always raise presser foot before threading. Ensure machine is off during threading.

Maintenance and Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Unplug machine before cleaning.
2. Remove needle plate: Use screwdriver to access bobbin area.
3. Clean lint and dust: Use small brush or vacuum attachment.
4. Oil sparingly: Use only sewing machine oil on designated points (see diagram).
5. Replace needle regularly: After 8-10 hours of sewing or if bent/dull.

CAUTION! Do not use compressed air; it can force lint into mechanism. Never oil plastic parts.

Accessories and Presser Feet

Included accessories enhance sewing capabilities for different techniques.

Attach presser foot: Raise presser foot lever, align foot shank, lower lever to lock.

Safety Information

Important safety precautions to prevent injury and damage.

• Always unplug machine when not in use, during threading, needle changes, or cleaning.
• Keep fingers away from moving parts, especially needle and feed dogs.
• Do not sew over pins; remove pins before they reach needle.
• Use correct needle and thread for fabric type.
• Ensure proper ventilation; machine may heat during extended use.
• Store in dry area; avoid extreme temperatures and humidity.

WARNING! This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities.

Troubleshooting

Reset: Turn machine off and on. For persistent issues, consult dealer.

Service: 1-877-276-8437; www.brother-usa.com