Brother SE 1900 Manual

The Brother SE 1900 is a computerized sewing and embroidery machine with a large 5" x 7" embroidery area, 138 built-in embroidery designs, 11 built-in fonts, 240 built-in sewing stitches, automatic needle threading, LCD touch screen display, USB port for importing designs, and advanced editing features. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Operation 4. Specifications 5. Controls and Functions 6. Sewing Operations 7. Embroidery Operations 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Sewing/Embroidery Machine, LCD Touch Screen, Automatic Needle Threader, USB Port, Embroidery Unit, Foot Controller, Accessory Case.

Feature	Description
Embroidery Area	5" x 7" (130mm x 180mm) maximum design size
Built-in Embroidery Designs	138 designs including decorative, floral, and alphabets
Built-in Sewing Stitches	240 stitches including utility, decorative, and quilting
LCD Touch Screen	Color display for easy design selection and editing
Automatic Needle Threader	Threads needle with push of lever
USB Port	Import custom embroidery designs from USB flash drive
Built-in Fonts	11 embroidery fonts for monogramming
Quick-Set Bobbin	Top drop-in bobbin system
Needle Up/Down	Programmable needle position
Speed Control Slider	Adjust sewing speed manually

Unpacking and Setup

Unpack and inspect all contents. Place on stable, level surface.

Remove machine from box: Lift machine by handle, not by embroidery unit.
Attach embroidery unit: Align marks, slide until it clicks into place.
Install foot controller: Plug into machine port.
Connect power: Plug power cord into machine, then into wall outlet.
Install needle: Loosen screw, insert needle with flat side to back, tighten.
Wind bobbin: Follow bobbin winding diagram in manual.

WARNING! Machine is heavy; use care when lifting. Ensure work area is well-lit and stable.

First-Time Operation

Power on machine; follow on-screen prompts.

Thread machine: Follow threading path marked on machine; use automatic needle threader.
Insert bobbin: Place bobbin in case with thread unwinding counterclockwise.
Select stitch: Use touch screen to choose sewing stitch or embroidery design.
Test sew: Use scrap fabric to test tension and stitch quality.
Adjust settings: Use LCD to modify stitch length, width, or embroidery size.

CAUTION! Keep fingers away from moving needle. Turn off power when threading or changing accessories.

Specifications

Type: Computerized Sewing and Embroidery Machine.
Embroidery Area: 5" x 7" (130mm x 180mm).
Built-in Designs: 138 embroidery designs, 11 fonts.
Built-in Stitches: 240 sewing stitches.
Display: Color LCD touch screen.
Maximum Sewing Speed: 850 stitches per minute.
Needle Positions: Adjustable left/right.
Bobbin: Quick-Set top drop-in bobbin.
Power Requirements: 120V AC, 60Hz.
Dimensions: 24.8"W x 17.7"D x 15.7"H (with embroidery unit).
Weight: 26.5 lbs (12 kg).

Controls and Functions

Access functions via LCD touch screen or physical buttons.

Front Panel: Power switch, Start/Stop button, Needle Up/Down, Speed control slider, Reverse stitch button.

LCD Touch Screen: Stitch selection, embroidery design editing, font selection, stitch adjustment (length/width), mirror imaging, rotation, resizing, lettering functions.

Menu Options: Sewing settings (tension, presser foot pressure), embroidery settings (hoop selection, thread color management), system settings (language, sound, screen brightness), design management (USB import, delete, combine).

Sewing Operations

Basic sewing procedures and stitch selection.

Select sewing mode: Press Sewing icon on touch screen.
Choose stitch: Browse categories (utility, decorative, quilting) or use quick-select numbers.
Adjust settings: Modify stitch length (0-5mm), width (0-7mm), or mirror image as needed.
Position fabric: Lower presser foot lever.
Start sewing: Press Start/Stop button or use foot controller.
Finish seam: Press Reverse stitch button to secure, then trim threads.

Tip: Always test stitch on scrap fabric first. Use appropriate presser foot for selected stitch.

Embroidery Operations

Creating and editing embroidery designs.

Attach embroidery unit: Ensure machine is off before attaching.
Select embroidery mode: Press Embroidery icon on touch screen.
Choose design: Browse built-in designs or import via USB.
Hoop fabric: Use appropriate hoop size; ensure fabric is taut.
Edit design: Resize, rotate, mirror, or combine with other designs.
Thread colors: Follow on-screen thread color sequence.
Start embroidery: Press Start button; machine will trim jump threads automatically.
Change colors: Machine will pause for color changes; follow prompts.

WARNING! Keep hands away from moving embroidery hoop. Never move hoop manually during embroidery.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Clean lint: Remove needle plate and bobbin case; brush away lint after each project.
Oil machine: Apply sewing machine oil to designated points every few months (see diagram).
Clean exterior: Use soft, dry cloth; avoid chemicals or abrasives.
Needle replacement: Replace needle after 8-10 hours of sewing or if damaged.
Update software: Check Brother website for firmware updates via USB.

CAUTION! Unplug machine before cleaning or maintenance. Use only Brother recommended accessories.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Brother Industries, Ltd. For support, visit www.brother-usa.com or contact Brother Customer Service at 1-800-284-4357. This product may be covered by one or more patents. See www.brother.com/patent for details.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't turn on	Power connection	Check power cord connections; ensure outlet is working.
Needle breaks	Incorrect needle/thread	Use correct needle type/size; ensure needle is inserted properly.
Poor stitch quality	Thread tension/threading	Rethread top and bobbin; adjust tension; clean lint.
Embroidery design misaligned	Hooping/fabric movement	Re-hoop fabric more tightly; use stabilizer.
USB design not recognized	File format/compatibility	Ensure design is in .pes format; reformat USB drive if needed.
Thread bunching underneath	Bobbin threading	Remove and rethread bobbin; ensure correct direction.
Touch screen not responding	Screen lock/calibration	Restart machine; recalibrate touch screen in settings.

Reset: Turn machine off and on. For persistent issues, perform factory reset via settings menu (back up designs first).

Service: 1-800-284-4357; www.brother-usa.com