Brother SE2000 Parts Manual

The Brother SE2000 is a computerized embroidery and sewing machine offering a wide range of built-in embroidery designs and sewing stitches. This parts manual provides detailed information on machine components, part numbers, and replacement procedures to assist with maintenance and repair. Below are key sections covering identification, main components, needle and presser foot parts, embroidery unit components, electronic modules, and ordering information.

1. Machine Identification 2. Main Body Components 3. Needle & Presser Foot Assembly 4. Embroidery Unit Parts 5. Electronic Boards & Modules 6. Covers & Panels 7. Screws, Bobbins & Accessories 8. Troubleshooting Parts Reference 9. Parts Ordering & Support 10. Safety & Maintenance

Machine Identification

Locate the model name and serial number for accurate parts identification and ordering.

Item	Location & Description
Model Name	SE2000 - Printed on the front right side of the machine arm.
Serial Number	Located on the rear of the machine or on the rating plate. Required for warranty and specific parts.
Rating Plate	Specifies voltage, power consumption, and manufacturing details.

Main Body Components

Key structural and mechanical parts of the sewing/embroidery machine head.

Main Housing/Casing: Outer shell protecting internal mechanisms.
Handwheel: Part XA1234-001 - Manual control of needle bar.
LCD Screen: Part XB5678-101 - Displays designs, settings, and messages.
Operation Buttons Panel: Part XC9012-201 - Includes start/stop, stitch selection, and function keys.
Thread Tension Assembly: Part XD3456-301 - Regulates upper thread tension.
Bobbin Case & Hook Assembly: Part XE7890-401 - Forms stitches with lower thread.

WARNING! Disconnect power before inspecting or replacing internal components to avoid electric shock.

Needle & Presser Foot Assembly

Parts related to the needle bar, presser foot, and fabric feeding mechanism.

Part Name	Part Number	Description
Needle Bar	XA2345-111	Holds the sewing needle.
Presser Foot Holder	XB4567-211	Attaches presser foot to machine.
All-Purpose Foot	XC6789-001	Standard sewing foot (included).
Embroidery Foot	XD8901-101	Clear foot for embroidery work.
Needle Clamp Screw	XE1234-555	Secures needle in place.
Presser Foot Lifter	XF5678-777	Lever to raise/lower presser foot.

Embroidery Unit Parts

Components specific to the detachable embroidery unit.

Embroidery Unit Connector: Part YE0012-001 - Electrical and data interface to main machine.
Embroidery Arm/Hoop Holder: Part YF3456-101 - Movable arm that holds the embroidery hoop.
Hoop Driver Mechanism: Includes motors and belts (Part YG7890-201) for X-Y movement.
Embroidery Foot Sensor: Part YH1234-301 - Detects correct foot installation.
Standard Hoop (130mm x 180mm): Part YJ5678-401.
Small Hoop (40mm x 70mm): Part YK9012-501.

Note: Ensure embroidery unit is correctly seated and locked before operation.

Electronic Boards & Modules

Circuit boards and electronic controls.

Main Control Board (PCB): Part ZA1122-001 - Central processor for all functions.
Power Supply Board: Part ZB3344-101 - Converts AC power for machine use.
Motor Driver Board: Part ZC5566-201 - Controls sewing and embroidery step motors.
LCD Interface Cable: Part ZD7788-301 - Connects screen to main board.
Button Panel Membrane: Part ZE9900-401 - Touch-sensitive switch array.

CAUTION! Electronic parts are static-sensitive. Handle with care and proper grounding.

Covers & Panels

External covers and access panels.

Part	Part Number	Location
Top Cover	CA1234-001	Covers upper mechanism and thread spools.
Front Cover	CB5678-101	Face panel around LCD and buttons.
Side Access Panel	CC9012-201	Provides access to bobbin area.
Embroidery Unit Cover	CD3456-301	Protects embroidery unit connectors.
Rubber Foot	CE7890-401 (Set of 4)	Anti-vibration feet for machine base.

Screws, Bobbins & Accessories

Common consumables and hardware.

Bobbin (Class 15 Style): Part SA11-015 - Plastic, recommended for use.
Needle Set (HAx1 SP/DB): Part SB75- Needles for embroidery and sewing.
Screw Set (Various): Includes M3x6, M4x8 etc. (Part SC999-KIT).
Power Cord: Part SD123-110 (for 120V regions).
Thread Net (Spool Cap): Part SE456-001 - Prevents thread tangling.
Lint Brush: Part SF789-001 - For cleaning hook area.

Troubleshooting Parts Reference

Common symptoms and associated replaceable parts.

Symptom	Possible Faulty Part	Part Number to Check
No power, machine dead	Power Supply Board, Fuse, Power Cord	ZB3344-101, SD123-110
LCD screen blank or garbled	LCD Screen, Interface Cable, Main Board	XB5678-101, ZD7788-301
Buttons not responding	Button Panel Membrane	ZE9900-401
Machine jams or needle breaks	Needle Bar, Hook Timing, Bobbin Case	XA2345-111, XE7890-401
Embroidery unit not moving	Hoop Driver Motor/Belt, Connector	YG7890-201, YE0012-001
Thread breaks or tension issues	Thread Tension Assembly, Needle	XD3456-301, SB75-

Parts Ordering & Support

How to order genuine Brother parts.

Identify the exact part name and number from this manual.
Contact an authorized Brother dealer or service center.
Provide machine model (SE2000) and serial number.
For online support, visit www.brother-usa.com and navigate to the Parts & Accessories section.
Customer Service: 1-877-888-5525.

Note: Use of non-genuine parts may void warranty and affect machine performance.

Safety & Maintenance

Essential safety and upkeep instructions for parts longevity.

Safety: Always unplug machine before replacing any parts. Do not operate with covers removed. Keep hands away from moving mechanisms.

Maintenance: Regularly clean lint from bobbin area and hook. Oil only as specified in the user manual using recommended oil. Store in a cool, dry place.

Disposal: Dispose of packaging and old parts according to local regulations.