Brother SE600 Instruction Manual

The Brother SE600 is a combination sewing and embroidery machine featuring a 4" x 4" embroidery area, 80 built-in embroidery designs, 6 built-in embroidery fonts, 103 built-in sewing stitches, automatic needle threader, LCD touch screen display, USB port for importing designs, built-in memory, and automatic thread cutter. Powered by standard household AC power. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Connecting to Computer 7. Embroidery Operation 8. Sewing Functions 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Sewing/Embroidery machine, LCD touch screen, USB port, Automatic needle threader, Built-in embroidery designs and fonts, Bobbin winding system, Foot pedal, Accessory compartment.

Feature	Description
LCD touch screen	For selecting stitches, editing designs, and viewing settings
USB port	For importing embroidery designs from computer or USB drive
Automatic needle threader	Threads needle with push of lever
Built-in embroidery designs	80 designs including decorative and utility patterns
Built-in embroidery fonts	6 fonts for monogramming and text
Built-in sewing stitches	103 stitches including utility, decorative, and heirloom
Automatic thread cutter	Cuts top and bobbin threads with button press
Bobbin winding system	Built-in bobbin winding on machine
Embroidery area	4" x 4" (100mm x 100mm) maximum design size
Speed control slider	Adjusts sewing and embroidery speed

Installation & Setup

Unpack and inspect contents. Place on stable, flat surface.

Remove all packaging materials and protective tape from machine.
Install foot controller: Plug into machine's foot controller jack.
Connect power: Plug power cord into machine, then into AC outlet.
Install needle: Use screwdriver to loosen needle clamp screw, insert needle with flat side toward back, tighten screw.
Wind bobbin: Place thread on spool pin, follow threading path to bobbin, engage bobbin winder.
Insert bobbin: Remove bobbin case, insert bobbin with thread unwinding counterclockwise, replace bobbin case.

WARNING! Keep hands away from moving parts during operation. Ensure machine is on stable surface to prevent tipping.

First-Time Operation

Power on machine; follow on-screen prompts.

Thread upper thread: Follow numbered threading path on machine, use automatic needle threader.
Draw up bobbin thread: Hold upper thread, turn handwheel toward you to bring bobbin thread up.
Select stitch: Use LCD touch screen to browse and select sewing stitch.
Test sew: Place fabric under presser foot, lower foot, press foot controller to begin sewing.
For embroidery: Hoop fabric in embroidery hoop, attach to machine, select design from LCD.

CAUTION! Always turn off power before changing needle or performing maintenance.

Specifications

Type: Computerized sewing and embroidery machine.
Embroidery Area: 4" x 4" (100mm x 100mm).
Built-in Designs: 80 embroidery designs, 6 embroidery fonts.
Built-in Stitches: 103 sewing stitches.
Display: LCD touch screen with graphic display.
Maximum Speed: 710 stitches per minute (sewing), 650 stitches per minute (embroidery).
Needle: HA-1 needle system, size 75/11 to 100/16.
Bobbin: Brother SA156, Class 15 type.
Memory: Built-in memory for designs, USB import capability.
Power Source: 120V AC, 60Hz.
Dimensions: 18.1" x 8.3" x 14.6" (460mm x 210mm x 370mm).
Weight: 17.6 lbs (8.0 kg).

Controls and Settings

Access functions via LCD touch screen or physical buttons. Front Panel: Power switch, Thread cutter button, Needle up/down button, Speed control slider, Start/stop button.

LCD Screen: Stitch selection, Design editing, Settings menu, Help functions, USB import.

Sewing Settings: Stitch length, Stitch width, Needle position, Thread tension, Mirror image, Twin needle. Embroidery Settings: Design rotation, Resizing, Combining designs, Color sequence editing, Lettering. System Settings: Language selection, Sound volume, Screen brightness, Unit of measurement, Machine reset.

Connecting to Computer

USB connection for design transfer.

Install Brother software: Install PE-DESIGN or other compatible software on computer.
Connect USB cable: Use standard USB cable to connect machine to computer.
Transfer designs: Use software to select and send designs to machine memory.
Access designs: On machine, select "USB" from embroidery menu to access imported designs.

Tip: Format USB drive to FAT32 before use. Maximum design size is 4" x 4".

Embroidery Operation

Supports built-in designs, imported designs, and monogramming.

Hoop fabric: Use appropriate size hoop with stabilizer if needed.
Attach hoop: Place hoop on embroidery unit, lock in place.
Select design: Browse designs on LCD, select desired pattern.
Edit design: Resize, rotate, combine, or mirror as needed.
Thread colors: Machine will prompt for color changes during embroidery.
Start embroidery: Press start button or foot controller to begin.
Monitor progress: Watch LCD for completion status and color change prompts.
Remove hoop: When finished, unlock hoop, remove fabric.

WARNING! Keep hands away from moving embroidery arm. Always use appropriate stabilizer for fabric type.

Sewing Functions

103 built-in stitches including straight, zigzag, decorative, and buttonhole.

Select stitch: Use LCD or stitch selection buttons.
Adjust settings: Modify length, width, tension as needed for fabric.
Attach presser foot: Use appropriate foot for selected stitch.
Position fabric: Place under presser foot, lower foot lever.
Begin sewing: Use foot controller or start/stop button.
Automatic buttonhole: Select buttonhole stitch, place button in foot, machine sews perfect buttonhole.
Twin needle: Install twin needle for parallel stitching (max width 4mm).

Tip: Always test stitch settings on scrap fabric before sewing project.

Care & Maintenance

Unplug before cleaning. Regular maintenance ensures optimal performance.

Cleaning: Use small brush to remove lint from bobbin area and feed dogs.
Oiling: Apply drop of sewing machine oil to hook race once per month (check manual for specific points).
Needle replacement: Replace needle after 8-10 hours of sewing or if damaged.
Cover: Use dust cover when not in use to prevent dust accumulation.

CAUTION! Use only Brother recommended needles and bobbins. Do not use compressed air for cleaning.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Brother Industries, Ltd. For support, visit www.brother-usa.com or contact Brother Customer Service at 1-877-888-5522. This product may be covered by one or more patents, see www.brother.com/patent.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine doesn't power on	Power connection	Check power cord connections; ensure outlet is working.
Thread breaking	Threading/tension	Rethread machine; check for burrs on needle; adjust tension.
Skipped stitches	Needle/thread mismatch	Replace needle; ensure correct needle size for fabric; use quality thread.
Bobbin thread bunching	Bobbin insertion	Remove and reinsert bobbin ensuring correct direction; check bobbin case.
Embroidery design misaligned	Hooping/stabilizer	Rehoop fabric tighter; use appropriate stabilizer; check design positioning.
USB design not importing	File format/USB drive	Ensure design file is compatible format (.pes, .dst); format USB to FAT32.
Uneven feeding	Presser foot pressure	Adjust presser foot pressure; clean feed dogs; check foot installation.

Reset: Turn off machine, wait 10 seconds, turn back on. For persistent issues, perform factory reset through settings menu.

Service: 1-877-888-5522; www.brother-usa.com