Brother SE700 Instruction Manual

The Brother SE700 is a computerized embroidery and sewing machine with a large embroidery area, built-in embroidery designs and fonts, USB port for importing designs, color touchscreen LCD display, automatic needle threader, drop-in bobbin system, adjustable sewing speed, and multiple built-in stitches. Powered by standard household electrical outlet. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Color touchscreen LCD, embroidery unit, sewing arm, bobbin case, presser foot, needle plate, USB port, power switch, handwheel.

Unpacking and Setup

Unpack all components carefully. Place machine on stable, flat surface.

1. Remove packaging materials: Take off all tape and protective covers.
2. Attach embroidery unit: Align and slide into position until it clicks.
3. Install foot controller: Plug into appropriate jack on machine.
4. Connect power: Plug power cord into machine, then into wall outlet.
5. Install needle: Loosen needle clamp screw, insert needle with flat side to back, tighten.

WARNING! Machine is heavy; lift with care using both hands. Ensure stable surface to prevent tipping.

First-Time Operation

Power on machine; follow initial setup prompts on touchscreen.

1. Thread machine: Follow numbered threading path on machine; use automatic needle threader.
2. Wind bobbin: Place thread on spool pin, follow bobbin winding path, press foot controller.
3. Insert bobbin: Drop bobbin into case with thread unwinding counterclockwise.
4. Select stitch/design: Use touchscreen to browse and select.
5. Test on scrap fabric: Always test settings before starting project.

CAUTION! Keep fingers away from moving needle. Always turn off power when threading or changing accessories.

Specifications

• Type: Computerized embroidery and sewing machine.
• Embroidery Area: 5" x 7" (130mm x 180mm).
• Built-in Designs: 100+ embroidery designs, 5 fonts.
• Stitches: Multiple utility, decorative, and quilting stitches.
• Maximum Speed: Up to 650 stitches per minute.
• Display: Color LCD touchscreen.
• Connectivity: USB port for design import.
• Needle: Standard sewing machine needle (HAx1 SP).
• Power Requirements: Standard household electrical outlet.
• Dimensions: Varies with embroidery unit attached.

Controls and Functions

Access functions via touchscreen or physical buttons. Front Panel: Power switch, speed control slider, thread cutter button, needle up/down button.

Touchscreen: Design selection, editing, stitch settings, file management, setup menu.

Embroidery Functions: Design resize, rotate, combine, mirror, lettering. Sewing Functions: Stitch selection, length/width adjustment, tension control. Setup: Language selection, sound volume, screen brightness, unit settings. Memory: Save custom designs and settings to USB or internal memory.

Embroidery Operations

Supports built-in designs and imported designs via USB.

1. Hoop fabric: Secure fabric in embroidery hoop without stretching.
2. Attach hoop: Place hoop on embroidery unit, lock in place.
3. Select design: Browse designs on touchscreen or import via USB.
4. Edit design: Resize, rotate, combine designs as needed.
5. Thread colors: Follow color change sequence displayed on screen.
6. Start embroidery: Press start button or foot controller.
7. Monitor progress: Watch on screen; machine will stop for color changes.
8. Remove hoop: After completion, unlock and remove hoop from unit.

WARNING! Always use embroidery foot. Keep hands clear of moving parts during operation.

Sewing Operations

Basic sewing, decorative stitching, and quilting functions.

1. Select appropriate foot: Install correct presser foot for selected stitch.
2. Adjust settings: Set stitch length, width, and tension for fabric type.
3. Position fabric: Lower presser foot at beginning of seam.
4. Start sewing: Press foot controller gently to begin.
5. Guide fabric: Let machine feed fabric; do not pull or push.
6. Finish seam: Backstitch at end to secure stitches.
7. Cut threads: Use automatic thread cutter or scissors.

Tip: Always test stitch settings on scrap fabric before sewing project.

Maintenance & Cleaning

Unplug machine before cleaning. Regular maintenance ensures optimal performance.

1. Clean lint: Remove needle plate and bobbin case; brush away lint.
2. Oil machine: Apply sewing machine oil to designated points as per manual.
3. Clean exterior: Use soft, dry cloth; avoid liquids on electronic components.
4. Needle replacement: Change needle regularly (every 8-10 hours of sewing).
5. Cover when not in use: Protect from dust and sunlight.

CAUTION! Never use compressed air to clean machine. Use only recommended sewing machine oil.

Regulatory Information

FCC Compliance: Class B digital device; complies with Part 15 of FCC rules. CE Marking: Complies with European directives. Copyright © Brother Industries, Ltd. All rights reserved. For support, visit www.brother-usa.com or contact Brother Customer Service at 1-877-4-BROTHER. Serial number located on back of machine.

Troubleshooting

Reset: Turn machine off, wait 30 seconds, turn back on.

Service: 1-877-4-BROTHER; www.brother-usa.com