Brother Sewing Machine CE1125PRW Manual

The Brother CE1125PRW is a computerized sewing machine featuring 25 built-in stitches, a one-step automatic buttonhole, automatic needle threader, drop-in bobbin system, adjustable stitch length and width, free arm capability, and built-in LED lighting. It operates on 120V AC and is designed for home sewing projects. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Operation 4. Specifications 5. Controls and Functions 6. Stitch Selection and Settings 7. Threading and Bobbin Winding 8. Maintenance and Cleaning 9. Accessories Included 10. Safety Information 11. Troubleshooting

Features at a Glance

Key components: Computerized control panel, automatic needle threader, drop-in bobbin system, free arm, built-in LED light, foot pedal, accessory storage.

FeatureDescription
Built-in Stitches25 stitches including utility, decorative, and stretch
Automatic ButtonholeOne-step buttonhole for consistent results
Automatic Needle ThreaderEasy threading with lever mechanism
Drop-in Bobbin SystemTop-loading, jam-resistant bobbin
Free ArmRemovable flatbed for sewing cuffs and sleeves
LED LightingBright illumination of sewing area
Stitch Length/Width ControlAdjustable via dials on control panel
Reverse Sewing LeverFor reinforcing stitches
Foot PedalControls sewing speed
Accessory StorageBuilt-in compartment for feet and tools

Unpacking and Setup

Unpack and inspect all contents. Place on stable, flat surface.

  1. Remove machine from box and all packaging materials.
  2. Attach foot pedal: Plug into port on right side of machine.
  3. Connect power: Plug power cord into machine and then into 120V outlet.
  4. Install needle: Use screwdriver to loosen needle clamp, insert needle with flat side toward back, tighten.
  5. Attach presser foot: Lower presser foot lever, snap foot into place.

WARNING! Keep hands clear of needle area during setup. Ensure machine is unplugged when installing needle.

First-Time Operation

Plug in power, turn on machine, and follow these steps.

  1. Wind bobbin: Place thread on spool pin, guide through bobbin winding tension, press foot pedal.
  2. Insert bobbin: Drop bobbin into case with thread clockwise, pull thread through slot.
  3. Thread upper thread: Follow numbered guides, use automatic needle threader.
  4. Select stitch: Turn stitch selection dial to desired pattern.
  5. Test sew: Place fabric under presser foot, lower foot, press pedal to sew.

CAUTION! Always turn off and unplug machine before threading or changing accessories.

Specifications

Controls and Functions

Control Panel: Stitch selection dial, stitch length dial, stitch width dial, reverse lever, power switch.

Front Panel: Power switch, stitch dials, bobbin winder, handwheel, presser foot lever, thread cutter.

Stitch Selection: Turn dial to select stitch (1-25). Stitch Length: Adjust from 0-5mm. Stitch Width: Adjust from 0-7mm for zigzag and decorative stitches. Reverse Sewing: Hold lever to sew backwards. Tension Control: Dial on front for upper thread tension (default 4).

Stitch Selection and Settings

Use stitch dial to select pattern. Refer to stitch chart for recommended settings.

  1. Straight Stitch: Dial 1, length 2.5mm, width 0mm.
  2. Zigzag Stitch: Dial 2, length 2.0mm, width 5mm.
  3. Buttonhole: Dial 3, follow markings on foot for sizing.
  4. Decorative Stitches: Dials 4-25, adjust length/width as desired.
  5. Stretch Stitches: Dials 14-16 for knit fabrics.

Tip: Test stitch on scrap fabric before sewing project.

Threading and Bobbin Winding

Proper threading ensures smooth operation.

  1. Upper Threading: Follow numbered guides from spool to needle. Use automatic threader by pulling lever down.
  2. Bobbin Winding: Place spool on pin, thread through guide, wind onto bobbin with foot pedal.
  3. Insert Bobbin: Drop bobbin into case with thread clockwise. Pull thread through slot and under tension spring.
  4. Draw Up Bobbin Thread: Hold upper thread, turn handwheel toward you to bring bobbin thread up.

WARNING! Always raise needle to highest position before threading. Keep fingers away from moving parts.

Maintenance and Cleaning

Regular maintenance ensures optimal performance.

  1. Cleaning: Unplug machine. Remove needle plate and bobbin case. Use brush to remove lint.
  2. Oiling: Apply sewing machine oil to hook race and moving parts as per manual (sparingly).
  3. Needle Replacement: Replace needle after every 8-10 hours of sewing or if bent/dull.
  4. Storage: Cover machine when not in use to prevent dust accumulation.

CAUTION! Unplug before cleaning. Use only sewing machine oil; never use household oils.

Accessories Included

Safety Information

Read all instructions before use. Keep away from children. Do not operate with damaged cord or plug. Always unplug when not in use or during maintenance. Use only Brother recommended accessories. Do not place heavy objects on power cord. Avoid using near water or damp locations.

Electrical Safety: 120V AC only. Use proper outlet. Do not modify plug.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine not runningPower cord, switchCheck plug connection; ensure power switch is on.
Thread bunching underneathIncorrect threading, tensionRe-thread upper and bobbin thread; adjust tension.
Needle breaksWrong needle, bent needle, fabric pullReplace needle; ensure correct type; don't pull fabric.
Uneven stitchesThread tension, needleAdjust tension dial; replace needle.
Buttonhole not formingFoot not attached properlyRe-attach buttonhole foot; follow markings.
Machine noisyLint, lack of oilClean and oil as per maintenance section.

Service: For repairs, contact authorized Brother service center. Do not attempt to disassemble machine.

Support: Brother International: 1-877-276-8437 or www.brother-usa.com

Brother Sewing Machine CE1125PRW Manual © - All Rights Reserved 2025