Brother Sewing Machine CE8080PRW Manual

The Brother CE8080PRW is a versatile, computer-controlled sewing machine with 80 built-in stitches, automatic needle threader, drop-in bobbin system, LCD display, adjustable sewing speed, and multiple presser feet. It features one-step buttonholes, free-arm capability, and is designed for a wide range of sewing projects from basic to decorative. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: LCD screen, stitch selection dial, automatic needle threader, drop-in bobbin, speed control slider, presser foot lever, free-arm convertible flatbed.

Setup & Installation

Unpack and inspect contents. Place on stable, flat surface.

1. Remove all packaging materials and protective covers.
2. Attach power cord: Plug into machine and wall outlet (120V AC).
3. Install foot controller: Plug into machine port.
4. Attach accessory tray: Slide onto free-arm if included.
5. Install needle: Loosen needle clamp screw, insert needle with flat side to back, tighten.

WARNING! Keep fingers away from needle area during setup. Ensure machine is unplugged when installing needle.

First-Time Operation

Plug in power, turn on machine, follow steps for threading and bobbin.

1. Wind bobbin: Place thread on spool pin, guide through bobbin winding tension, press foot controller.
2. Insert bobbin: Drop bobbin into case with thread clockwise; pull thread under tension spring.
3. Thread upper thread: Follow numbered guides, use automatic needle threader.
4. Select stitch: Turn dial to desired stitch number.
5. Test sew: Place fabric under presser foot, lower foot, press foot controller.

CAUTION! Always lower presser foot before sewing. Keep hands clear of moving needle.

Specifications

• Model: Brother CE8080PRW.
• Stitches: 80 built-in stitches.
• Buttonholes: One-step automatic buttonhole.
• Needle Threader: Automatic.
• Bobbin: Drop-in, Class 15 type.
• Display: LCD with stitch indicators.
• Speed: Adjustable up to 850 stitches per minute.
• Presser Feet: Multiple included (zigzag, buttonhole, zipper, blind hem, etc.).
• Power Supply: 120V AC, 60Hz.
• Warranty: Limited 25-year warranty.

Controls and Settings

Access functions via dials, buttons, and LCD. Front Panel: Power switch, stitch selection dial, stitch width/length adjustment, reverse stitch button, needle up/down button.

LCD Display: Shows stitch number, recommended foot, stitch length/width settings.

Stitch Length: Adjust from 0-5mm. Stitch Width: Adjust from 0-7mm for zigzag and decorative stitches. Reverse: Hold button for reinforcement stitching. Needle Position: Press needle up/down to set stop position. Speed Control: Slider for slow to max speed.

Stitch Selection & Functions

Select stitch via dial; adjust settings as needed.

1. Utility Stitches: Straight, zigzag, stretch stitches (1-20).
2. Decorative Stitches: Scallops, leaves, flowers (21-60).
3. Heirloom Stitches: Satin, cross stitches (61-80).
4. Buttonhole: Select buttonhole stitch; place fabric under foot; machine sews automatically.
5. Zipper Insertion: Use zipper foot; adjust needle position.
6. Blind Hem: Use blind hem foot and stitch.

Tip: Always test stitch on scrap fabric before sewing project.

Threading & Bobbin Winding

Proper threading ensures smooth operation.

1. Upper Threading: Follow guides from spool pin to needle; use automatic threader.
2. Bobbin Winding: Place spool on pin, thread through guide, wind onto bobbin.
3. Bobbin Insertion: Drop in with thread pulling clockwise; pull thread under tension.
4. Drawing Up Bobbin Thread: Hold upper thread, turn handwheel toward you to bring up bobbin thread.

WARNING! Ensure presser foot is raised when threading upper thread. Turn power off when winding bobbin.

Maintenance & Cleaning

Regular cleaning prevents lint buildup and ensures performance.

1. Unplug machine before cleaning.
2. Remove needle plate screws; clean under plate with brush.
3. Clean bobbin area and race hook with lint brush.
4. Oil sparingly only as indicated in manual (specific points).
5. Wipe exterior with soft, dry cloth.

CAUTION! Do not use compressed air; it can force lint deeper. Never oil without checking manual.

Accessories Included

Safety Information

Always follow safety guidelines to prevent injury or damage.

• Unplug machine when not in use, during threading, needle changes, or cleaning.
• Keep fingers away from moving parts and needle.
• Do not sew over pins; remove pins before stitching over them.
• Use correct needle and thread for fabric type.
• Ensure adequate lighting and stable work surface.
• Disconnect power during electrical storms.

WARNING! Never operate with damaged cord or plug. Keep ventilation openings clear.

Troubleshooting

Reset: Turn machine off and on. Consult manual for error codes on LCD.

Service: For repairs, contact authorized Brother service center. 1-877-467-4289; www.brother-usa.com