Brother Sewing Machine ES2000 Computer Manual

The Brother ES2000 is a versatile computer sewing machine featuring 200 built-in stitches, automatic needle threading, LCD display, drop-in bobbin system, quick-set bobbin, adjustable sewing speed, built-in needle threader, free arm capability, and multiple presser feet. Powered by standard household electricity. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: LCD display, stitch selection dial, automatic needle threader, drop-in bobbin system, quick-set bobbin, free arm, accessory storage, and multiple presser feet.

Unpacking and Setup

Unpack and inspect contents. Place on stable, flat surface.

1. Remove machine from box: Lift using carrying handle; remove all packaging materials.
2. Attach power cord: Plug into machine and then into grounded electrical outlet.
3. Install foot controller: Plug into machine port near power cord.
4. Attach accessory tray: Slide onto free arm if desired for storage.
5. Install needle: Use screwdriver to loosen needle clamp screw, insert needle with flat side to back, tighten screw.

WARNING! Machine is heavy; lift with care to avoid injury. Ensure all connections are secure before powering on.

First-Time Operation

Power on machine; follow setup steps.

1. Wind bobbin: Place thread on spool pin, guide thread through bobbin winding tension disk, place bobbin on winder, push to right, press foot controller.
2. Insert bobbin: Open bobbin cover, drop bobbin in with thread unwinding counterclockwise, pull thread through slot and under tension spring.
3. Thread upper thread: Raise presser foot, follow numbered threading path on machine, use automatic needle threader.
4. Draw up bobbin thread: Hold upper thread tail, turn handwheel toward you until needle goes down and up, pull upper thread to bring bobbin thread up through needle plate.
5. Select stitch: Turn stitch selection dial to desired pattern.

CAUTION! Keep fingers away from moving needle. Always turn power off when threading or changing accessories.

Specifications

• Model: Brother ES2000 Computer Sewing Machine.
• Stitches: 200 built-in stitches.
• Stitch Length: Adjustable up to 5mm.
• Stitch Width: Adjustable up to 7mm.
• Needle Positions: Adjustable left, center, right.
• LCD Display: Monochrome with stitch information.
• Bobbin: Class 15 transparent bobbin.
• Presser Feet: 8 included; snap-on style.
• Power Source: 120V AC, 60Hz.
• Weight: Approximately 17.6 lbs (8 kg).

Controls and Functions

Access functions via buttons and dials. Front Panel: Power switch, stitch selection dial, LCD display, reverse stitch button, needle up/down button, automatic thread cutter button.

Stitch Selection: Turn dial to select from 200 stitches; LCD shows recommended presser foot and settings. Stitch Settings: Adjust stitch length and width with dedicated buttons; settings appear on LCD. Speed Control: Slider adjusts maximum sewing speed. Automatic Functions: Needle threader, thread cutter, bobbin winding.

Stitch Selection and Settings

Select from utility, decorative, heirloom, and quilting stitches.

1. Turn stitch selection dial to desired stitch number.
2. Check LCD for recommended presser foot and default settings.
3. Adjust stitch length (0-5mm) using length button.
4. Adjust stitch width (0-7mm) using width button (for zigzag and decorative stitches).
5. For buttonholes: Select buttonhole stitch, use buttonhole foot, follow markings for consistent size.

Tip: Always test stitch settings on scrap fabric before sewing project.

Basic Sewing Techniques

Follow these steps for successful sewing.

1. Raise presser foot and place fabric under foot, aligning edge with desired seam guide.
2. Lower presser foot lever.
3. Press foot controller to start sewing; guide fabric gently without pulling.
4. For reverse stitching, press and hold reverse button at beginning and end of seam to lock stitches.
5. To finish, press automatic thread cutter button or raise needle, lift presser foot, pull fabric to back, and cut threads.
6. For free arm sewing: Remove accessory tray to access free arm for sewing sleeves and cuffs.

WARNING! Never sew over pins; remove pins as you sew to avoid needle breakage and injury.

Maintenance and Cleaning

Regular maintenance ensures optimal performance.

1. Unplug machine before cleaning.
2. Remove needle plate: Use screwdriver to remove screws, lift plate.
3. Clean lint and dust from bobbin area and feed dogs using small brush.
4. Oil machine as directed in manual: Use only sewing machine oil on specified points.
5. Replace needle regularly: Every 8-10 hours of sewing or with new project.
6. Wipe exterior with soft, dry cloth.

CAUTION! Do not use compressed air; it can force lint into machine. Never spray cleaners or lubricants directly on machine.

Accessories Included

Safety Information

Important safety precautions for operation.

• Always unplug machine when not in use, during threading, when changing needles, or when cleaning.
• Keep fingers away from moving parts, especially needle area.
• Do not use bent or damaged needles.
• Ensure proper ventilation; do not cover machine while in use.
• Use only recommended accessories and parts from Brother.
• Keep machine dry; avoid exposure to moisture.
• This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities.

WARNING! Risk of electric shock. Do not remove covers; refer servicing to qualified personnel.

Troubleshooting

Reset: Turn power off and on to reset computer functions.

Service: For repairs, contact authorized Brother service center. Visit www.brother-usa.com or call 1-877-467-4289.