Brother Sewing Machine Manual CE5000PRW

The Brother CE5000PRW is a computerized sewing machine with 50 built-in stitches, automatic needle threader, drop-in bobbin system, LCD display, adjustable sewing speed, and multiple presser feet. It features easy stitch selection, one-step buttonholes, free arm capability, and is designed for a variety of sewing projects from garments to crafts. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Operation 4. Specifications 5. Controls and Functions 6. Stitch Selection and Settings 7. Threading and Bobbin 9. Maintenance and Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Computerized control panel, Automatic needle threader, Drop-in bobbin system, LCD screen, Free arm, Accessory storage, Power and foot pedal connectors.

Feature	Description
Built-in Stitches	50 stitches including utility, decorative, and heirloom
Automatic Needle Threader	Easily threads needle with lever mechanism
Drop-in Bobbin	Top-loading, jam-resistant bobbin system
LCD Display	Shows selected stitch, stitch length, and width settings
One-Step Buttonhole	Automatic buttonhole with sensor for consistent size
Adjustable Speed Control	Slider for controlling maximum sewing speed
Free Arm	Removable accessory tray for sewing cuffs and sleeves
Presser Feet	Includes buttonhole foot, zipper foot, blind hem foot, and more
Needle Position	Adjustable needle up/down function
Stitch Length/Width	Adjustable for custom stitch appearance

Unpacking and Setup

Unpack and inspect all contents. Place on stable, flat surface.

Remove machine from box: Lift machine by its handle, not by accessories.
Attach power cord: Plug into machine and then into 120V AC outlet.
Connect foot pedal: Plug into machine port.
Install needle: Loosen needle clamp screw, insert needle with flat side to back, tighten.
Wind bobbin: Place thread on spool pin, guide through bobbin winding tension, press foot pedal.
Insert bobbin: Drop bobbin into case with thread running counterclockwise.

WARNING! Keep fingers away from needle area during operation. Ensure machine is unplugged during setup steps involving needle or bobbin.

First-Time Operation

Plug in machine, turn power switch ON.

Thread upper thread: Follow numbered guides, use automatic needle threader.
Pull up bobbin thread: Hold upper thread, turn handwheel toward you to bring up bobbin thread.
Select stitch: Use stitch selection dial or buttons to choose desired stitch.
Adjust settings: Use LCD and control buttons to set stitch length and width.
Begin sewing: Place fabric under presser foot, lower presser foot lever, gently press foot pedal.

CAUTION! Always lower presser foot before sewing. Start at slow speed to gain control.

Specifications

Model: Brother CE5000PRW
Type: Computerized Sewing Machine
Stitches: 50 built-in stitches
Buttonholes: One-step automatic (7 styles)
Needle Threader: Automatic
Bobbin: Drop-in, Class 15 type
Display: LCD screen
Speed: Adjustable up to 850 stitches per minute
Presser Feet: 6 included (buttonhole, zipper, blind hem, etc.)
Power Supply: 120V AC, 60Hz
Dimensions: Compact design with free arm capability

Controls and Functions

Access functions via control panel buttons and dial. Front Panel: Power switch, Stitch selection dial, LCD display, Stitch length/width buttons, Reverse stitch button, Needle up/down button.

LCD Display: Shows stitch number, length, width, and recommended presser foot.

Stitch Selection: Turn dial to choose stitch group, use +/- buttons for specific stitch. Settings: Adjust stitch length (0-5mm) and width (0-7mm) for customization. Utility: Reverse stitch for reinforcing, automatic thread cutter (if equipped).

Stitch Selection and Settings

Select from 50 stitches including straight, zigzag, stretch, decorative.

Turn stitch selection dial to desired category (utility, decorative, etc.).
Use stitch number buttons to select specific stitch (displayed on LCD).
Adjust stitch length: Press length button, use +/- to set (shorter for finer fabrics).
Adjust stitch width: Press width button, use +/- to set (wider for zigzag or decorative).
For buttonholes: Select buttonhole stitch, place fabric under buttonhole foot, press start.

Tip: Test stitch settings on scrap fabric before sewing project.

Threading and Bobbin

Upper Threading:

Raise presser foot and needle to highest position.
Place thread spool on spool pin.
Follow threading guide numbers (1 through 10).
Use automatic needle threader: Lower lever, hook thread, release lever.

Bobbin Winding and Insertion:

Place empty bobbin on bobbin winder shaft.
Guide thread from spool through bobbin winding tension disk.
Press bobbin winder shaft to engage, press foot pedal to wind.
Insert bobbin into drop-in case with thread running counterclockwise.
Pull thread through slit, under tension spring.

WARNING! Ensure bobbin is correctly inserted to prevent jams. Use Brother recommended bobbins (Class 15).

Maintenance and Cleaning

Unplug machine before maintenance. Regular cleaning prevents lint buildup.

Remove needle plate: Use screwdriver to loosen screws, lift plate.
Clean feed dogs and bobbin area: Use small brush to remove lint and threads.
Oil sparingly: Only if specified in manual; use sewing machine oil.
Replace needle regularly: Dull or bent needles cause poor stitching.
Cover machine when not in use to prevent dust accumulation.

CAUTION! Do not use compressed air; it can force lint into machine. Never oil without checking manual first.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Brother Industries, Ltd. All rights reserved. For support, visit www.brother-usa.com or contact Brother Customer Service at 1-877-467-4289. This product is designed for household use.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine not running	Power connection	Check power cord is plugged in; ensure power switch is ON.
Thread bunching underneath	Incorrect threading/bobbin	Re-thread upper thread; ensure bobbin inserted correctly.
Needle breaks	Wrong needle/incorrect insertion	Replace needle; ensure flat side is to back; use correct needle type.
Skipped stitches	Dull needle/wrong thread	Replace needle; use quality thread appropriate for fabric.
Uneven stitches	Tension issues	Check threading; adjust tension dial (usually 4 for normal fabrics).
Buttonhole not forming	Fabric/ foot not properly placed	Use stabilizer for stretch fabrics; ensure buttonhole foot is attached.
LCD not displaying	Power issue	Check power source; if problem persists, contact service.

Reset: Turn machine off and on to reset computerized settings.

Service: 1-877-467-4289; www.brother-usa.com