Brother Sewing Machine Manual CS6000i

The Brother CS6000i is a versatile, feature-rich computerized sewing machine designed for a wide range of sewing projects. It offers 60 built-in stitches, an automatic needle threader, a drop-in top bobbin system, a wide table for larger projects, and a speed control slider. This manual covers safety, features, setup, operation, maintenance, and troubleshooting for optimal use.

Features at a Glance

Key components: Computerized control panel, Automatic needle threader, Drop-in top bobbin with clear cover, Wide extension table, Built-in LED light, Foot pedal with speed control.

Installation & Setup

Unpack and inspect all contents. Place on a stable, flat surface.

1. Remove all packaging materials and protective covers.
2. Attach the wide extension table to the free arm until it clicks into place.
3. Plug the foot pedal into the machine, then plug the power cord into a 120V AC outlet.
4. Install the needle: Loosen the needle clamp screw, insert needle with flat side to the back, tighten screw.
5. Wind and insert the bobbin: Follow the threading diagram on the machine.
6. Thread the upper thread: Use the automatic needle threader for ease.

WARNING! Keep fingers away from moving parts during setup. Ensure the machine is unplugged when installing the needle.

First-Time Operation

Power on the machine; familiarize yourself with basic controls.

1. Turn on the power switch; the LED light will illuminate.
2. Select a stitch: Use the stitch selection dial or buttons to choose a basic straight stitch (01).
3. Place fabric under the presser foot, lower the presser foot lever.
4. Gently press the foot pedal to start sewing. Use the speed control slider to limit maximum speed.
5. Practice on scrap fabric to adjust tension and stitch length as needed.
6. Use the reverse stitch button to reinforce the beginning and end of seams.

CAUTION! Always lower the presser foot before sewing. Never pull fabric forcefully; let the feed dogs move it.

Specifications

• Model: Brother CS6000i Computerized Sewing Machine.
• Stitches: 60 built-in stitches (utility, decorative, quilting, heirloom).
• Buttonholes: 7 one-step automatic buttonholes.
• Speed: Up to 850 stitches per minute, adjustable via slider.
• Needle Positions: Adjustable with needle position button.
• Bobbin: Drop-in, Class 15 type (transparent).
• Presser Feet: 9 included snap-on feet.
• Lighting: Built-in LED light above needle area.
• Power Source: 120V AC, 60Hz.
• Dimensions: Compact design with wide table attached.
• Warranty: 25-year limited warranty.

Controls and Settings

Access functions via the control panel. Front Panel: Power switch, Stitch selection dial, LCD screen, Start/Stop button, Reverse stitch button, Needle up/down button.

Stitch Adjustment: Stitch length (0-5mm), Stitch width (0-7mm), Tension dial (0-9). Special Buttons: Auto-size buttonhole, Thread cutter button (on some models).

Settings: Default stitch settings are pre-programmed. Use the LCD screen to view selected stitch number and recommended settings. Adjust stitch length and width for different fabrics and techniques.

Stitch Selection & Functions

Select stitches using the dial or buttons. Stitch chart is printed on the machine.

1. Turn the stitch selection dial to choose a stitch category (utility, decorative, etc.).
2. Use the +/- buttons to select the specific stitch number (01-60).
3. For buttonholes: Select a buttonhole style (61-67), place button in foot, and follow automatic steps.
4. For zigzag and stretch stitches: Adjust width and length for desired effect.
5. For quilting: Use the walking foot (included) for even fabric feeding.

Tip: Refer to the stitch guide for recommended fabric types and presser feet for each stitch.

Advanced Features

Utilize the machine's computerized functions for complex projects.

1. Automatic Needle Threader: Pull down the lever, hook thread around guide, and release.
2. Drop-in Bobbin: Transparent cover allows monitoring of bobbin thread.
3. Speed Control: Slide to set maximum sewing speed for delicate work.
4. Free Arm: Remove extension table for sewing sleeves and cuffs.
5. Presser Feet: Quick-change system for switching between feet (zigzag, buttonhole, zipper, etc.).
6. Memory Function: Some models remember last stitch used when powered off.

WARNING! Do not force the needle threader; ensure needle is in highest position before use. Use correct presser foot for each technique.

Maintenance & Cleaning

Unplug machine before cleaning. Regular maintenance ensures optimal performance.

1. Remove lint and dust from bobbin area and feed dogs using the small brush provided.
2. Oil the machine as per manual instructions (usually minimal oiling required).
3. Wipe exterior with a soft, dry cloth. Do not use liquids or aerosols.
4. Replace needle regularly (after 8-10 hours of sewing or for each new project).
5. Check belt and motor area periodically for wear (consult service manual).

CAUTION! Never immerse machine in water. Use only recommended sewing machine oil.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Brother Industries, Ltd. For support, visit www.brother-usa.com or contact Brother Customer Service at 1-877-467-4289. This product is covered by a 25-year limited warranty. Always use genuine Brother parts and accessories.

Troubleshooting

Reset: Turn machine off and on to reset computerized settings if display acts erratically.

Service: For repairs, contact authorized Brother service center. 1-877-467-4289; www.brother-usa.com