brother sewing machine manual se2000

The Brother SE2000 is a computerized embroidery and sewing machine featuring a 4" x 4" embroidery area, 98 built-in embroidery designs, 10 built-in sewing fonts, automatic needle threading, LCD touch screen display, USB port for importing designs, built-in memory, automatic thread cutter, and a wide range of built-in stitches. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main sewing unit, LCD touch screen, Embroidery unit, Foot pedal, Power cord, Accessory box.

Unpacking and Setup

Unpack all components and inspect for damage. Place on stable, flat surface.

1. Remove packing materials: Take machine, embroidery unit, and accessories from box.
2. Attach embroidery unit: Slide unit into designated slot on machine until it clicks.
3. Connect power: Plug power cord into machine and into 120V AC outlet.
4. Install foot pedal: Connect pedal to machine port and place on floor.
5. Insert needle: Use screwdriver to secure needle with flat side to rear.

WARNING! Machine is heavy; lift with care. Ensure work area is well-lit and free of obstructions.

First-Time Operation

Power on machine; LCD screen will illuminate.

1. Wind bobbin: Place thread on spool pin, guide through bobbin winder tension, press pedal.
2. Insert bobbin: Drop bobbin into case with thread clockwise; pull thread through slot.
3. Thread upper thread: Use automatic needle threader following numbered path on machine.
4. Select stitch: Use touch screen to choose stitch or embroidery design.
5. Test sew: On scrap fabric, sew few stitches to check tension and threading.

CAUTION! Keep fingers away from needle during operation. Turn power off when threading.

Specifications

• Type: Computerized embroidery and sewing machine.
• Embroidery Area: 4" x 4" (100mm x 100mm).
• Built-in Designs: 98 embroidery designs, 10 fonts.
• Built-in Stitches: Over 100 stitches.
• Display: Full-color LCD touch screen.
• Maximum Speed: 750 stitches per minute.
• Needle Positions: Adjustable with needle up/down function.
• Presser Feet: Includes embroidery, zigzag, buttonhole, zipper, and walking foot.
• Power Requirements: 120V AC, 60Hz.
• Dimensions: Approx. 21.7" W x 11.8" H x 17.7" D.
• Weight: Approx. 24.2 lbs.

Controls and Functions

Access functions via LCD touch screen and physical buttons.

Front Panel: Power switch, Speed control slider, Thread cutter button, Needle up/down button, Start/stop button.

LCD Screen: Stitch selection, Design editing, Lettering, Settings, File management.

Stitch Settings: Adjust stitch length (0-5mm), stitch width (0-7mm), tension (0-9).

Embroidery Editing: Rotate, mirror, combine designs, resize (within limits), change thread colors on screen.

Threading and Bobbin

Proper threading is essential for quality stitches.

1. Upper threading: Follow numbered path; use automatic needle threader for needle eye.
2. Bobbin winding: Place spool on pin, thread through bobbin winder tension disc, press pedal.
3. Bobbin insertion: Drop-in bobbin system; ensure thread pulls clockwise.
4. Tension adjustment: Default is 4; adjust based on fabric and thread type.

Tip: Use same thread type in bobbin and needle for balanced stitches.

Embroidery Operation

Steps to embroider designs.

1. Hoop fabric: Secure fabric in embroidery hoop without wrinkles.
2. Attach hoop: Place hoop onto embroidery unit arm; lock in place.
3. Select design: Choose from built-in library or import via USB.
4. Edit design: Resize, rotate, or combine as needed on screen.
5. Thread colors: LCD displays color sequence; change threads when prompted.
6. Start embroidery: Press start button or foot pedal; machine trims jumps automatically.
7. Monitor progress: Watch design stitch out; pause if needed to change thread or check fabric.

WARNING! Keep hands away from moving hoop during embroidery. Do not force hoop.

Sewing Stitches

Machine offers utility, decorative, and heirloom stitches.

1. Select stitch: Touch stitch category on screen, then specific stitch.
2. Adjust settings: Modify length, width, and tension for fabric.
3. Attach presser foot: Choose appropriate foot for stitch type.
4. Start sewing: Guide fabric gently; machine will sew at set speed.
5. Buttonholes: Use automatic buttonhole foot; machine measures and sews perfect buttonhole.
6. Monogramming: Select font, type letters on screen, adjust size and spacing.

Note: Always test stitch on scrap fabric before sewing project.

Care & Maintenance

Unplug machine before cleaning. Regular maintenance ensures optimal performance.

1. Cleaning: Use small brush to remove lint from bobbin area and feed dogs.
2. Oiling: Apply drop of sewing machine oil to hook race and other moving parts as manual specifies.
3. Needle replacement: Change needle after every 8 hours of sewing or for new project.
4. Cover: Use dust cover when not in use to prevent dust accumulation.

CAUTION! Do not use compressed air; it can force lint deeper. Use only recommended oil.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Brother Industries, Ltd. For support, visit www.brother-usa.com or contact Brother Customer Service at 1-877-888-5522. Machine incorporates safety features per UL and CSA standards.

Troubleshooting

Reset: Turn power off, wait 30 seconds, restart. For persistent issues, perform factory reset via settings menu.

Service: 1-877-888-5522; www.brother-usa.com