brother sewing machine se600 manual

The Brother SE600 is a combination sewing and embroidery machine featuring a 4" x 4" embroidery area, 80 built-in embroidery designs, 6 built-in fonts, 103 sewing stitches, automatic needle threading, drop-in top bobbin, LCD touch screen display, USB port for importing designs, and built-in memory. It includes a wide range of accessories for sewing, quilting, and embroidery. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Operation 4. Specifications 5. Controls and Functions 6. Basic Sewing 7. Embroidery Operation 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Sewing/Embroidery Machine, LCD Touch Screen, Foot Controller, Embroidery Unit, Accessory Set, Power Cord.

FeatureDescription
Sewing Stitches103 built-in stitches including utility, decorative, and quilting
Embroidery Designs80 built-in designs, 6 built-in fonts
Embroidery Area4" x 4" (100mm x 100mm)
LCD Touch ScreenFor easy stitch selection and editing
Automatic Needle ThreaderOne-push needle threading system
Drop-in Top BobbinEasy bobbin setting with clear view window
USB PortFor importing embroidery designs from USB stick
Built-in MemoryFor saving custom designs and patterns
Speed Control SliderAdjust sewing speed
Start/Stop ButtonSew without foot control

Unpacking and Setup

Unpack all contents carefully. Place machine on stable, flat surface.

  1. Remove all packing materials from machine and accessories.
  2. Attach the Embroidery Unit: Align and push until it clicks into place.
  3. Connect Foot Controller to machine port.
  4. Plug power cord into machine and then into wall outlet (120V AC).
  5. Install needle and thread machine (upper and lower threading).

WARNING! Keep hands away from moving parts during operation. Ensure machine is on a stable surface to prevent tipping.

First-Time Operation

Power on machine; familiarize yourself with controls.

  1. Select sewing mode: Press sewing mode icon on LCD screen.
  2. Select a stitch: Touch stitch category, then select desired stitch.
  3. Adjust settings: Use screen to adjust stitch length, width, etc.
  4. Test sew on scrap fabric to ensure proper threading and tension.
  5. For embroidery: Attach hoop, select design, and start embroidery mode.

CAUTION! Always turn off power before changing needle or performing maintenance.

Specifications

Controls and Functions

Access functions via LCD touch screen and physical buttons.

Front Panel: Power Switch, Start/Stop Button, Needle Up/Down Button, Speed Control Slider.

LCD Screen: Stitch selection, embroidery design editing, settings menu, help functions.

Sewing Settings: Stitch length, stitch width, mirror image, twin needle settings.

Embroidery Settings: Design selection, resizing, rotating, combining designs, thread color selection.

Utility Functions: Needle threader, bobbin winding, automatic thread cutter.

Basic Sewing

Follow these steps for general sewing projects.

  1. Raise presser foot and insert fabric under foot.
  2. Lower presser foot lever.
  3. Press Start/Stop button or gently press foot controller to begin sewing.
  4. Guide fabric gently; do not push or pull.
  5. Press reverse button to reinforce beginning and end of seam.
  6. Use needle up/down button to position needle.
  7. For buttonholes: Use automatic buttonhole foot and select buttonhole stitch.

Tip: Always use the correct presser foot for the selected stitch.

Embroidery Operation

Create embroidered designs using built-in patterns or imported designs.

  1. Attach embroidery unit and hoop fabric securely in embroidery hoop.
  2. Select embroidery mode on LCD screen.
  3. Choose design from built-in library or import via USB.
  4. Edit design if needed (resize, rotate, combine).
  5. Load correct thread colors and check bobbin.
  6. Press Start/Stop button to begin embroidery.
  7. Machine will stop automatically for color changes; follow on-screen prompts.
  8. When finished, trim jump threads and remove fabric from hoop.

WARNING! Keep hands away from moving embroidery hoop during operation. Always use stabilizer for best results.

Care & Maintenance

Regular maintenance ensures optimal performance.

  1. Unplug machine before cleaning.
  2. Clean lint from bobbin area and feed dogs after each project.
  3. Oil machine as instructed in manual (use only Brother recommended oil).
  4. Replace needle regularly (after 8-10 hours of sewing).
  5. Cover machine when not in use to prevent dust accumulation.

CAUTION! Do not use compressed air to clean machine as it can force lint into mechanisms.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Brother Industries, Ltd. For support, visit www.brother-usa.com or contact Brother Customer Service at 1-877-467-4289. This product is designed for household use only.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine doesn't power onPower connectionCheck power cord connections; ensure outlet is working.
Thread breakingIncorrect threading/tensionRe-thread upper and lower threads; check needle condition; adjust tension.
Poor stitch qualityNeedle/thread/fabric mismatchUse correct needle and thread for fabric type; clean lint from bobbin area.
Embroidery design misalignedHoop not secureRe-hoop fabric tightly with proper stabilizer; check design positioning.
USB design not loadingFile format/compatibilityEnsure design is in supported format (.pes, .dst, etc.); reformat USB stick if needed.
Bobbin thread not catchingBobbin inserted incorrectlyRemove and reinsert bobbin ensuring thread unwinds in correct direction.

Reset: Turn machine off and on to reset computer if screen freezes.

Service: 1-877-467-4289; www.brother-usa.com

brother sewing machine se600 manual © - All Rights Reserved 2025