Brother XL 570 Manual

The Brother XL 570 is a versatile mechanical sewing machine designed for home use, featuring 57 built-in stitches, a one-step automatic buttonhole, adjustable stitch length and width, drop-in bobbin system, built-in needle threader, free arm capability, and multiple presser feet. Powered by standard household electrical outlet. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Sewing machine head, Free arm, Stitch selection dial, Stitch length/width controls, Bobbin winder, Built-in needle threader, Foot pedal, Power cord.

Feature	Description
Built-in stitches	57 stitches including utility, decorative, and stretch stitches
Automatic buttonhole	One-step buttonhole for consistent results
Drop-in bobbin	Top-loading, jam-resistant bobbin system
Needle threader	Built-in automatic needle threader
Free arm	Convertible for sewing sleeves and cuffs
Stitch length control	Adjustable from 0-4 mm
Stitch width control	Adjustable up to 5 mm for zigzag stitches
Presser feet	Includes zipper foot, buttonhole foot, blind stitch foot
Reverse stitch	Button for reinforcing stitches
Power switch	On/off control with built-in light

Unpacking and Setup

Remove all packaging materials and inspect contents. Place on stable, flat surface.

1. Remove machine from box: Lift carefully, avoiding damage to accessories.
2. Attach foot pedal: Connect pedal cord to machine port.
3. Connect power: Plug power cord into machine and electrical outlet.
4. Install needle: Loosen needle clamp screw, insert needle with flat side facing back.
5. Wind bobbin: Place thread on spool pin, follow threading path to bobbin winder.
6. Insert bobbin: Place wound bobbin in bobbin case with thread clockwise.

WARNING! Keep fingers away from needle area during operation. Ensure machine is unplugged during setup.

First-Time Operation

Power on machine; follow basic threading procedure.

1. Thread upper thread: Follow numbered threading path from spool to needle.
2. Use needle threader: Lower lever to automatically thread needle.
3. Pull up bobbin thread: Hold upper thread, turn handwheel toward you.
4. Select stitch: Turn stitch selection dial to desired pattern.
5. Adjust settings: Set stitch length and width as needed.
6. Begin sewing: Place fabric under presser foot, lower foot, press pedal gently.

CAUTION! Always start with needle at highest position. Keep hands clear of moving needle.

Specifications

• Model: Brother XL 570
• Stitches: 57 built-in stitches
• Buttonholes: 1 one-step automatic buttonhole
• Stitch Length: Adjustable 0-4 mm
• Stitch Width: Adjustable up to 5 mm
• Bobbin: Top-loading, Class 15 transparent bobbin
• Needle: Standard household sewing machine needle (HAx1)
• Presser Feet: 6 included feet
• Power Supply: 120V, 60Hz (US standard)
• Dimensions: 15.7" x 7.1" x 12.2"
• Weight: 13.2 lbs

Controls and Settings

Main controls located on front and right side of machine. Stitch Selection Dial: Turn to select stitch pattern (1-57). Stitch Length Dial: Adjust from 0 (for buttonholes) to 4 mm. Stitch Width Dial: Adjust zigzag width (0-5 mm). Reverse Stitch Button: Hold for backstitching. Handwheel: Manual control of needle position. Power/Light Switch: Turns machine and built-in light on/off.

Additional Features: Built-in needle threader, Bobbin winding system, Drop-in bobbin with clear cover, Free arm conversion, Presser foot pressure adjustment (for certain fabrics).

Stitch Selection and Use

Stitch chart located on machine. Common stitches:

1. Straight stitch (1-4): Basic sewing, length adjustable.
2. Zigzag stitch (5-8): For finishing edges, appliqué, stretch fabrics.
3. Blind hem stitch (9): For nearly invisible hems.
4. Elastic stitches (10-15): For knit and stretch fabrics.
5. Decorative stitches (16-57): For embellishment and creative projects.
6. Buttonhole stitch (marked): One-step automatic buttonhole.

Tip: Always test stitch on scrap fabric before sewing project.

Basic Sewing Techniques

Follow these steps for common sewing tasks:

1. Seam sewing: Select straight stitch, align fabric edges, sew with 5/8" seam allowance.
2. Zigzag finish: Set zigzag stitch, sew along raw edge to prevent fraying.
3. Buttonhole: Mark button position, attach buttonhole foot, select buttonhole stitch.
4. Zipper installation: Use zipper foot, baste zipper area, stitch close to zipper teeth.
5. Free arm sewing: Remove accessory tray for sewing cylindrical items like sleeves.
6. Reverse stitching: Hold reverse button at beginning and end of seams to secure.

WARNING! Never pull fabric while sewing; let feed dogs move fabric.

Maintenance and Cleaning

Regular maintenance ensures optimal performance.

1. Daily: Remove lint from bobbin area with brush provided.
2. Weekly: Clean feed dogs and needle plate area.
3. Monthly: Oil machine according to diagram in manual (use sewing machine oil only).
4. Needle replacement: Change needle after 8-10 hours of sewing or for new project.
5. Storage: Cover machine when not in use to prevent dust accumulation.

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended oils.

Accessories Included

Accessory	Purpose
All-purpose foot (on machine)	General sewing
Zipper foot	Installing zippers
Buttonhole foot	Making buttonholes
Blind stitch foot	Creating blind hems
Button sewing foot	Attaching buttons
Overcasting foot	Finishing fabric edges
Bobbin (4)	Extra bobbins
Needles (3)	Extra needles
Screwdriver	For needle plate removal
Brush	For lint cleaning
Seam ripper	For removing stitches

Safety Information

Important safety precautions for safe operation:

• Always unplug machine when changing needles, cleaning, or not in use.
• Keep fingers away from moving parts, especially needle area.
• Do not use bent or damaged needles.
• Ensure proper ventilation when using machine for extended periods.
• Keep machine away from water and other liquids.
• Use only Brother recommended accessories and parts.
• Supervise children and inexperienced users at all times.
• Disconnect power cord by pulling plug, not cord.

DANGER! Risk of electric shock if used with damaged cord or in wet conditions.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't run	Power issues	Check power connection; ensure switch is on; check circuit breaker.
Needle breaks	Incorrect needle/bent needle	Replace needle; ensure properly inserted; don't pull fabric.
Thread bunching underneath	Incorrect threading/bobbin	Rethread top and bobbin; ensure bobbin inserted correctly.
Uneven stitches	Tension issues	Adjust tension dial; rethread; check needle size for fabric.
Machine skips stitches	Wrong needle/damaged needle	Change needle; use correct needle for fabric type.
Fabric not feeding	Feed dogs lowered/dirty	Check feed dog position; clean feed dogs; adjust presser foot pressure.
Unusual noise	Lint buildup/thread jam	Clean bobbin area; remove thread jam; check for foreign objects.
Buttonhole not forming	Incorrect foot/stitch setting	Use buttonhole foot; ensure proper stitch selection; stabilize fabric.

Service: For persistent issues, contact Brother customer service at 1-800-284-4329 or visit www.brother-usa.com