CE5500PWR Sewing Machine Manual

The CE5500PWR is a computerized sewing machine featuring 50 built-in stitches, automatic needle threader, one-step buttonhole, adjustable stitch length and width, speed control slider, drop-in bobbin system, LED lighting, free arm capability, and multiple presser feet. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection & Functions 7. Threading & Bobbin Winding 8. Maintenance & Cleaning 9. Accessories Included 10. Safety Information 11. Troubleshooting

Features at a Glance

Key components: Computerized control panel, Automatic needle threader, Drop-in bobbin system, LED work light, Free arm, Foot pedal, Power adapter.

Feature	Description
Built-in Stitches	50 stitches including utility, decorative, and stretch
Automatic Needle Threader	Easy threading with push lever
One-Step Buttonhole	Automatic buttonhole sizing
Drop-in Bobbin	Top-loading, clear cover for visibility
Speed Control Slider	Adjustable sewing speed
LED Lighting	Bright illumination of work area
Free Arm	For sewing cuffs and sleeves
Stitch Length/Width	Adjustable via dials
Presser Feet	Includes zipper, buttonhole, blind hem, and more
Reverse Stitch	Button for reinforcing stitches

Installation & Setup

Unpack and inspect contents. Place on stable, flat surface.

Attach power cord: Plug adapter into machine, then into 120V outlet.
Install foot pedal: Connect to machine port, place on floor.
Attach accessory tray: Snap into place at right of machine.
Install needle: Loosen screw, insert needle flat side back, tighten.
Wind bobbin: Follow threading diagram; place bobbin in case.

WARNING! Keep fingers away from needle area during setup. Ensure machine is unplugged when installing needle.

First-Time Operation

Plug in machine; turn power switch ON.

Thread upper thread: Follow numbered path; use automatic threader.
Insert bobbin: Drop bobbin into case, thread through slot.
Raise presser foot: Lift lever to raise foot.
Select stitch: Turn pattern dial or press stitch button.
Test sew: Place fabric, lower presser foot, gently press pedal.

CAUTION! Always lower presser foot before sewing. Start at slow speed.

Specifications

Type: Computerized Sewing Machine.
Stitches: 50 built-in stitches.
Buttonholes: One-step automatic.
Needle Positions: Adjustable left/right.
Max Stitch Length: 4mm.
Max Stitch Width: 5mm.
Lighting: LED bulb.
Bobbin: Class 15 transparent.
Power Supply: 120V AC, 60Hz.
Dimensions: Standard portable size.

Controls and Settings

Control Panel: Power switch, Stitch selection dial, Stitch length dial, Stitch width dial, Reverse stitch button, Speed control slider.

Functions: Automatic needle threader lever, Presser foot lifter, Handwheel, Bobbin winder spindle.

Stitch Settings: Select pattern via dial; adjust length (0-4mm) and width (0-5mm). Speed: Use slider or foot pedal control. Needle: Up/down button for precise positioning.

Stitch Selection & Functions

Stitch categories: Straight, Zigzag, Decorative, Stretch, Buttonhole.

Turn pattern dial to desired stitch number.
Adjust length/width as needed for fabric.
For buttonhole: Select buttonhole stitch, place button in foot, machine auto-sizes.
Reverse: Hold button to sew backwards for reinforcement.
Needle position: Use adjustment to move needle left/right.

Tip: Test stitch on scrap fabric first. Refer to stitch guide for recommended settings.

Threading & Bobbin Winding

Upper Threading:

Raise presser foot and needle to highest position.
Follow numbered path on machine.
Use automatic threader: Lower lever, hook thread, pull back.

Bobbin Winding:

Place spool on pin, thread through guide.
Wind thread around bobbin clockwise.
Push bobbin winder to right, press pedal.
Stop when full; cut thread, push winder left.

WARNING! Ensure machine is off during threading. Keep threads taut.

Maintenance & Cleaning

Unplug before maintenance. Clean lint regularly with brush.

Remove needle plate screws; lift plate.
Use brush to remove lint from feed dogs and bobbin area.
Oil moving parts per manual instructions (sparingly).
Wipe exterior with dry cloth.

CAUTION! Do not use compressed air; it can force lint deeper. Never oil without unplugging.

Accessories Included

Accessory	Use
All-Purpose Foot	General sewing
Zipper Foot	Installing zippers
Buttonhole Foot	One-step buttonholes
Blind Hem Foot	Invisible hemming
Button Sewing Foot	Attaching buttons
Bobbin (3)	Extra bobbins
Needles (set)	Assorted sizes
Seam Ripper	Removing stitches
Brush	Cleaning lint
Power Cord & Pedal	Operation

Safety Information

Always unplug when not in use, changing needle, or cleaning. Keep hands away from moving parts. Use proper needle for fabric. Do not sew over pins. Ensure adequate lighting. Keep cord away from heated surfaces.

WARNING! Risk of electric shock if used with damaged cord. Do not operate with wet hands.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine not running	Power/plug	Check power switch; ensure plugged in; check outlet.
Thread bunching underneath	Threading/bobbin	Re-thread upper and bobbin; ensure bobbin inserted correctly.
Needle breaks	Wrong needle/bent	Replace needle; ensure correct type/size; do not pull fabric.
Uneven stitches	Tension/thread	Adjust tension dial; use same weight thread top/bottom.
Fabric not feeding	Presser foot/feed dogs	Lower presser foot; clean feed dogs; check stitch length.

Reset: Turn power off/on to reset computerized functions.

Service: Contact authorized service center; do not attempt internal repairs.