SE 1900 Brother Embroidery Machine Manual

The Brother SE 1900 is a combination sewing and embroidery machine featuring a large 5" x 7" embroidery area, 138 built-in embroidery designs, 11 built-in fonts, 240 built-in sewing stitches, automatic needle threading, LCD touch screen, USB port for importing designs, built-in memory, and advanced editing capabilities. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main machine unit, LCD touch screen, Embroidery unit, Foot pedal, Power cord, Accessory kit (hoops, needles, bobbins, tools).

Unpacking and Setup

Unpack all components carefully. Place on stable, level surface.

1. Remove machine from packaging: Lift machine by base, not by handle.
2. Attach embroidery unit: Align marks on machine and unit, slide until click.
3. Connect power: Plug power cord into machine, then into 120V outlet.
4. Install foot pedal: Connect to port on right side of machine.
5. Wind bobbin: Follow threading diagram; use included bobbin winder.
6. Thread machine: Follow numbered path; use automatic needle threader.

WARNING! Machine is heavy; use proper lifting technique. Ensure stable surface to prevent tipping.

First-Time Operation

Power on machine; follow on-screen prompts.

1. Select language: Touch screen to choose language (default ENGLISH).
2. Test stitches: Load scrap fabric; test basic straight stitch.
3. Calibrate embroidery unit: Follow screen instructions for first-time calibration.
4. Load first design: Select built-in design from category menu.
5. Hoop fabric: Use correct hoop size; ensure fabric is taut.
6. Start embroidery: Press start button; monitor first few stitches.

CAUTION! Keep fingers away from moving needle. Always lower presser foot before sewing.

Specifications

• Machine Type: Computerized Sewing and Embroidery Machine
• Embroidery Area: 5" x 7" (130mm x 180mm)
• Built-in Designs: 138 embroidery designs, 11 embroidery fonts
• Sewing Stitches: 240 built-in stitches
• Maximum Speed: 850 stitches per minute (sewing), 650 spm (embroidery)
• Needle Positions: Adjustable with needle up/down function
• Display: Full-color LCD touch screen (3.7")
• Memory: Built-in plus USB import capability
• Power Requirements: 120V AC, 60Hz
• Dimensions: 20.9" x 11.8" x 17.7" (with embroidery unit attached)
• Weight: 24.2 lbs (11 kg)

Controls and Functions

Access functions via LCD touch screen or physical buttons. Front Panel: Power switch, Start/Stop button, Speed control slider, Reverse button.

Touch Screen: Design selection, editing functions, stitch settings, file management, help menu.

Embroidery Functions: Design resize (50%-120%), rotate, mirror, combine designs, lettering, edit stitches. Sewing Functions: Stitch selection, length/width adjustment, tension control, needle position, thread cutter. Utility: Language selection, calibration, machine settings, default reset.

Embroidery Setup

Proper setup ensures quality embroidery results.

1. Select design: Browse categories or use search function.
2. Edit design: Resize, rotate, or combine with other designs.
3. Hoop fabric: Use correct hoop; ensure stabilizer is used when needed.
4. Attach hoop: Place on embroidery unit; lock in position.
5. Thread colors: Follow color sequence shown on screen.
6. Position design: Use arrow keys to move design within hoop area.
7. Start embroidery: Press start; machine will trim jump threads automatically.

Tip: Always use stabilizer appropriate for your fabric type.

Sewing Functions

Switch to sewing mode by detaching embroidery unit.

1. Select stitch: Browse categories (utility, decorative, quilting).
2. Adjust settings: Stitch length (0-5mm), width (0-7mm), tension (0-9).
3. Attach presser foot: Use appropriate foot for selected stitch.
4. Position fabric: Lower presser foot lever.
5. Start sewing: Use foot pedal or start/stop button.
6. Automatic features: Thread cutter, needle up/down, speed control.

WARNING! Always use correct needle for fabric type. Change needle after 8 hours of sewing.

Design Import & Editing

Import custom designs via USB port.

1. Format USB: Use FAT32 format; create "Brother" folder.
2. Copy designs: Transfer PES, DST, EXP, or other supported files.
3. Insert USB: Connect to machine USB port.
4. Access files: Touch "USB" icon on screen.
5. Edit designs: Combine, resize, rotate, add text.
6. Save to memory: Store edited designs in machine memory.

Supported formats: PES, DST, EXP, PEC, HUS, JEF, SEW, VIP, VP3, XXX.

Maintenance & Cleaning

Unplug machine before maintenance. Regular cleaning prevents issues.

1. Daily: Remove lint from bobbin area with brush.
2. Weekly: Oil hook race (1-2 drops of Brother sewing machine oil).
3. Monthly: Clean feed dogs with soft brush.
4. As needed: Clean LCD screen with soft, dry cloth.
5. Storage: Cover machine when not in use; store in dry area.

CAUTION! Never use compressed air; it forces lint deeper. Use only Brother recommended oil.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Brother Industries, Ltd. All rights reserved. For support, visit www.brother-usa.com or contact Brother Customer Service at 1-877-467-4289. This product incorporates copyright protection technology.

Troubleshooting

Reset: Turn machine off, wait 30 seconds, restart. For persistent errors, consult service.

Service: 1-877-467-4289; www.brother-usa.com. Authorized service centers only.