Sewing Machine Manual Brother PE800

The Brother PE800 is a computerized embroidery machine with a 5" x 7" embroidery area, built-in embroidery designs, USB port for importing custom designs, color touchscreen LCD, automatic needle threader, built-in lettering fonts, adjustable embroidery speed, and thread tension control. It supports various embroidery file formats and comes with essential accessories. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Embroidery unit, LCD touchscreen, USB port, Automatic needle threader, Bobbin winding system, Embroidery foot, Hoop set, Power cord.

Unpacking and Setup

Unpack all contents carefully. Place machine on stable, flat surface.

1. Remove all packaging materials and protective covers.
2. Attach embroidery unit: Align marks on machine and unit, push until it clicks.
3. Install foot holder: Lower presser foot lever, slide foot holder into place.
4. Connect power cord: Plug into machine, then into 120V AC outlet.
5. Wind bobbin: Place thread on spool pin, follow path to bobbin, use bobbin winding function.
6. Insert bobbin: Place bobbin in case with thread clockwise, insert into shuttle.

WARNING! Machine is heavy; lift with care. Ensure stable surface to prevent tipping.

First-Time Operation

Power on machine; follow on-screen prompts.

1. Thread needle: Use automatic needle threader or manual method.
2. Select design: Touch screen to browse built-in designs or USB designs.
3. Hoop fabric: Secure fabric in embroidery hoop without wrinkles.
4. Attach hoop: Place hoop on embroidery unit, lock in place.
5. Start embroidery: Press start button, machine will begin stitching.
6. Monitor progress: Watch screen for completion status.

CAUTION! Keep fingers away from moving needle and embroidery area during operation.

Specifications

• Type: Computerized embroidery machine
• Embroidery Area: 5" x 7" (130mm x 180mm)
• Built-in Designs: 138 designs, 10 frames, 6 fonts
• Stitch Speed: Up to 650 stitches per minute
• Needle: Embroidery needle size 75/11 (included)
• Display: 3.2" color LCD touchscreen
• Connectivity: USB port for design import
• File Formats: PES, JEF, SEW, DST, EXP, PEC
• Power Requirements: 120V AC, 60Hz
• Dimensions: 17.7" x 10.2" x 15.7" (450mm x 260mm x 400mm)
• Weight: 24.2 lbs (11 kg)

Controls and Functions

Access functions via touchscreen or physical buttons. Front Panel: Power switch, Start/Stop button, Speed control slider, Thread cutter button.

Touchscreen: Design selection, Editing tools (rotate, resize, combine), Lettering, Settings menu, USB import.

Design Editing: Resize (25%-200%), Rotate (360°), Mirror (horizontal/vertical), Combine multiple designs. Lettering: Select font, input text, adjust spacing, size, and alignment. Settings: Thread tension adjustment, needle position, sound volume, screen brightness, language selection (English default).

Embroidery Preparation

Proper preparation ensures quality results.

1. Select appropriate fabric: Stable fabrics work best for embroidery.
2. Use stabilizer: Hoop stabilizer with fabric to prevent puckering.
3. Choose thread: Use quality embroidery thread; match needle size.
4. Hoop correctly: Fabric should be taut but not stretched in hoop.
5. Thread machine: Follow threading path; use automatic needle threader.
6. Insert bobbin: Ensure bobbin is wound evenly and inserted correctly.
7. Test stitch: Run test design on scrap fabric to check tension.

Tip: Always use stabilizer appropriate for your fabric weight and type.

Basic Embroidery Steps

Follow these steps for successful embroidery.

1. Power on: Turn machine on, wait for home screen.
2. Select design: Touch design icon, browse built-in or USB designs.
3. Edit if needed: Resize, rotate, or combine designs as desired.
4. Hoop fabric: Place fabric and stabilizer in embroidery hoop.
5. Attach hoop: Secure hoop on embroidery unit, ensure it's locked.
6. Position needle: Use arrow keys to move hoop to starting position.
7. Start embroidery: Press start button; machine will begin automatically.
8. Color changes: Machine will stop for thread color changes; follow prompts.
9. Complete design: Machine stops when finished; remove hoop carefully.
10. Trim threads: Use thread cutter or scissors to trim jump threads.

WARNING! Never leave machine unattended while embroidery is in progress.

Advanced Features

Design Combination: Combine multiple designs into one project. Lettering: Create text with built-in fonts; adjust size, spacing, and alignment. USB Import: Transfer custom designs from computer to USB drive, then to machine. Editing Functions: Resize, rotate, mirror, and edit individual design colors. Memory Function: Save edited designs to machine memory for future use.

Maintenance & Cleaning

Unplug machine before cleaning. Regular maintenance ensures optimal performance.

1. Clean lint: Remove bobbin case and use brush to clean lint from shuttle area.
2. Oil machine: Apply sewing machine oil to designated points as per manual.
3. Clean exterior: Use soft, dry cloth; avoid liquids on electronic components.
4. Needle replacement: Replace needle after every project or if damaged.
5. Cover machine: Use dust cover when not in use to prevent dust accumulation.

CAUTION! Never use compressed air to clean machine as it can force lint deeper into mechanism.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Brother Industries, Ltd. All rights reserved. For support, visit www.brother-usa.com or contact Brother Customer Service at 1-877-467-4289. This product is designed for household use only.

Troubleshooting

Reset: Turn machine off, wait 30 seconds, then restart. For persistent issues, consult service center.

Service: 1-877-467-4289; www.brother-usa.com