Sewing Machine Manual Brother XR9550PRW

The Brother XR9550PRW is a versatile computerized sewing machine featuring 110 built-in stitches, automatic needle threader, drop-in bobbin system, LCD screen, adjustable sewing speed, built-in buttonholer, free arm capability, and multiple presser feet. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection and Functions 7. Threading and Bobbin 8. Maintenance and Cleaning 9. Safety Information 10. Warranty and Support 11. Troubleshooting

Features at a Glance

Key components: Computerized control panel, Automatic needle threader, Drop-in bobbin system, LCD display, Free arm, Built-in stitch patterns, Accessory storage.

Feature	Description
Built-in Stitches	110 stitches including utility, decorative, and quilting
Automatic Needle Threader	Easy threading with push-pull mechanism
Drop-in Bobbin	Top-loading bobbin with clear cover
LCD Screen	Displays stitch selection and settings
Adjustable Speed Control	Slider for slow to maximum sewing speed
Automatic Buttonholer	One-step buttonhole with sensor
Free Arm	Removable extension table for cylindrical sewing
Presser Feet	Includes zigzag, buttonhole, zipper, blind hem, and more
Needle Position	Adjustable up/down with button control
Thread Cutter	Built-in thread cutter on side of machine

Unpacking and Setup

Unpack and inspect contents. Place on stable surface.

Remove machine from box: Lift machine by carrying handle.
Attach extension table: Slide onto free arm until it clicks.
Connect foot control: Plug into front socket.
Connect power: Plug power cord into machine, then into 120V outlet.
Install needle: Loosen screw, insert needle with flat side to back, tighten.

WARNING! Machine is heavy; lift with care. Ensure stable work surface.

First-Time Operation

Power on machine; follow setup steps.

Wind bobbin: Place thread on spool pin, guide through bobbin winder tension.
Insert bobbin: Drop bobbin into case with thread clockwise.
Thread upper thread: Follow numbered path on machine; use automatic threader.
Select stitch: Use stitch selection dial or buttons.
Test sew: Use scrap fabric to check tension and stitch quality.

CAUTION! Keep fingers away from needle during operation.

Specifications

Type: Computerized sewing machine.
Stitches: 110 built-in stitches.
Buttonholes: One-step automatic buttonholer.
Speed: Up to 850 stitches per minute.
Needle: HA-1 sewing machine needle (included).
Bobbin: Class 15 transparent bobbin.
Presser Feet: 8 included feet.
Display: LCD with stitch number and settings.
Power Source: 120V AC, 60Hz.
Dimensions: 16.1" x 7.2" x 12.2".
Weight: 13.2 lbs.

Controls and Settings

Access functions via control panel. Front Panel: Power switch, Stitch selection buttons, LCD screen, Speed control slider, Reverse stitch button.

Stitch Selection: Use dial or buttons to select stitch number. LCD displays stitch number and recommended foot.

Settings: Stitch length (0-5mm), Stitch width (0-7mm), Needle position (left/center/right). Special Functions: Automatic thread cutter (optional), Mirror imaging, Twin needle setting, Memory function for stitch sequences.

Stitch Selection and Functions

Stitch categories: Utility, Decorative, Quilting, Heirloom.

Select stitch: Turn dial or press +/- buttons.
Adjust settings: Use length/width buttons for customization.
Start sewing: Press foot control; machine starts automatically.
Reverse: Hold reverse button to reinforce stitches.
Buttonhole: Select buttonhole stitch, place fabric under foot; machine sews automatically.
Zipper installation: Use zipper foot; adjust needle position as needed.

Tip: Always test stitch on scrap fabric before sewing project.

Threading and Bobbin

Upper threading with automatic needle threader.

Raise presser foot and needle to highest position.
Place spool on pin; follow threading guide numbers 1-6.
Pull thread toward you through automatic threader hook.
Pull thread back through needle eye.
Bobbin winding: Place spool on pin, thread through guides, wind onto bobbin.
Insert bobbin: Drop into case, pull thread through slot.

WARNING! Ensure machine is off when threading. Keep thread path clear.

Maintenance and Cleaning

Unplug before maintenance. Clean lint regularly.

Remove needle plate: Use screwdriver to loosen screws.
Clean feed dogs and bobbin area: Use small brush.
Oil machine: Use sewing machine oil on designated points (see diagram).
Replace needle: After every 8 hours of sewing or for new project.

CAUTION! Use only sewing machine oil. Do not use household oils.

Safety Information

Always unplug when not in use. Keep hands away from moving parts. Use proper needle for fabric type. Do not sew over pins. Keep work area well-lit. Store in dry place.

Warranty and Support

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine not running	Power connection	Check power cord; ensure outlet works; check foot control connection.
Thread breaking	Tension/thread quality	Rethread machine; adjust tension; use quality thread.
Uneven stitches	Threading/bobbin	Rethread upper and bobbin threads; clean lint; check needle.
Fabric not feeding	Presser foot pressure	Raise and lower presser foot; clean feed dogs; check stitch length.
Needle breaking	Needle/bobbin	Replace needle; ensure correct insertion; check for bent needle.
Bobbin thread bunching	Bobbin threading	Remove and reinsert bobbin; ensure thread winds correctly.
Buttonhole not forming	Stitch selection/fabric	Select correct buttonhole stitch; use stabilizer for stretch fabrics.

Reset: Turn machine off and on to reset computerized functions.

Service: 1-800-284-4357; www.brother-usa.com